Twenty Myths About Window Repair Busted

Window Repairs
Window repairs can help homeowners save money and keep their homes comfortable. Window replacements may be required in the event of severe damage, such as broken glass or a broken window frame.
But many other issues can be addressed to extend the lifespan of your windows. Some common problems include:
Cracked or Broken Panes
Glass that is cracked can be caused by a lawnmower that throws errant rocks or by branches of trees being blown by strong winds. This is not only visually awful, but it could result in higher energy bills because the broken pieces allow cold air in to your home. Luckily, it's typically easy to repair windows that have cracked panes.
Begin by carefully removing glass using gloves and glasses. You may need use a utility knife to remove old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the wood of the frame with a soft cloth or paper towel.
Once the frame is clean and dry, apply a waterproof silicone caulking to the frame's perimeter. This prevents water from getting into the crack, which can cause further damage to the frame and the glass.
A bad crack in double-paned glass may affect the gas between the panes, rendering your windows less insulative. If the crack is so extensive that it compromises the strength of the window or if the pane inside is not there, you may need to call a professional.
Thermal stress cracks may also occur when there's an extreme temperature difference inside and outside your home. The glass is then able to expand and contract. If the cracks are on two sides of a glass, it is best to replace it instead of attempt to repair it.
Clear tape can be used to seal cracks in windows that aren't yet ready to be replaced. It can also keep out cold and bugs. You can also cut an amount of nylon stocking big enough to cover the entire crack and glue it with duct tape. It's not a permanent fix, but it will keep insects out and cold air away from your home. If you notice cracks on your older windows You should consult your local business to determine whether replacing the entire window is a better option.
Rotten Wood
Wood rot is a frequent problem for windows. It can affect the appearance of a house and can also be danger to your safety. It is, however, possible to repair rotted wood. You will first need to address the cause of the wood rot. Look for leaks on the roof and other places where water can enter the wood.
The next step is to remove any rotten areas of the window frame. This can be done using a rasp, chisel or claw hammer. After the areas that are rotten have been eliminated it is time to replace them with fresh wood. It is recommended to choose treated wood for this project since it is more resistant to rot. If you are unable to replace the wood that has been damaged, you can try using wood filler or hardener to help strengthen the damaged area. The majority of hardware stores have this type of product. Follow the instructions on the label of the product to achieve the most efficient results.
After you have repaired the damaged areas of the window sill, it's crucial to protect the area. Apply a water-resistant sealant to the wood. Sikkens for instance, is a great product to use.
You can also use an epoxy filler with two parts to protect the wood from further damage. It is simple to apply and gives an excellent finish. It is essential to follow the directions on the label. Once the epoxy filler has dried, you can rub the surface of the wood. Start with a rough sandpaper then move on to a smoother grade.
The most important thing you don't want to do is to make the area that has been damaged by exposed to more water. It is therefore an ideal idea to cover the area that has been repaired with an oil-based primer that will help protect it from moisture. After that, you can apply the waterproof wood sealant.
The website won't work
A window that isn't opening can be caused by a variety of reasons. window repairs may have settled, or the wood frames could have warped during humid weather. Somebody may have put them in place to protect themselves. But with some patience and the right tools, many windows that are stuck can be opened.
One of the most common causes of windows that isn't able to open is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges and locks. Additionally, hardware made of metal can get rusty when in contact with humidity and direct sunlight. Spraying grease on these areas to help to prevent oxidation and keep your windows functioning properly.
Stuck windows can be the result of a loosening or breakage of the pulleys that are used to raise and lower the window. These parts can lose their tension and get blocked, especially when the window is at least two stories above the ground.
If you are having trouble opening a window try using a pry bar to gently push the window to open a bit at each time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.
Another issue for windows that aren't opening is a faulty spring that prevents the window jamb from lowering or rising. Based on the manufacturer of your windows, you will be required to refer to the owner's manual for additional instructions.
If you've tried cleaning and lubricating the moving components on your windows, but they won’t open, then it's time to replace them. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows of your home go from being functional to useless. If your windows aren't properly shut could expose your home to water damage and burglary. Contact our team today to learn more about our replacement windows and services!