Ten Things You Shouldnt Share On Twitter

How to Repair Double Glazed Windows
There are a few distinct indications that your double glazed windows need repair. Draughts and water ingress are obvious indications of damage to the window frames. They should be repaired as quickly as possible.
Misting may also indicate that your window seals are in need of replacement. Replacing your window seals can solve the issue and stop draughts, leaks or condensation.
Broken Panes
One of the most common problems with double-glazed windows is broken glass. Double-pane windows are harder to break than single panes, however accidents can happen. It is important to repair damaged glass as quickly as you can.
Get rid of any glass fragments that may still be inside the frame. Don't forget to wear eye protection and gloves while doing this, as glass can be extremely sharp. Check the floor for any fragments that have fallen off after the shards have been removed. It is also recommended to look for any hooks of metal that might be holding the panes in place and take them out too.
Once the glass is removed and the glass is removed, you can begin the process of removing the old glass compound and glazing points (small fasteners that fix the glass in the window frame) and replacing them with new ones. It's a lengthy procedure that requires some tools. These include latex glazing putty; metallic glazing points; pliers; heat gun and a putty knife.
When removing the old glazing compound and points, it's best to start at the top of the sash, and work your way down. This will help you avoid getting any of the sash's wood or paint stuck to your tool. If you're looking to remove some of the wood from the sash, use the utility knife or chipper instead of chemical strippers which can cause damage.
After you've finished make sure you sand any bare wood to smooth it. Once the wood is smooth you can seal it using clear or linseed wood sealer. This will protect it from future water damage.
There are a few easy fixes you can attempt for a window that is cracked by a double-pane However, these solutions will not repair the crack and should be used only as a temporary measure. A silicone caulk can help to seal the gap, but it is important to make sure that you choose a high-quality caulk and follow proper application methods.
Condensation
If you've noticed water or mist between the glass panes of your double glazing, it's a sign that one of your windows has a broken seal. This could be a significant issue as it stops the gas or air that is used to insulate getting trapped between the two panes.
A double glazing specialist can easily repair this problem. To resolve the issue, your window contractor will take off the window sash that is affected and IGU (insulating glass unit) before blowing into a new gasket to create a sturdy and airtight seal to stop condensation from happening again. double glazing repair 'll also apply a specific drying agent to help dry the area and stop the condensation from recurring.
You may also notice the glass panes are a little cloudy in double-glazed windows, when the frame has moved over time. This can break the seal. This can be a major issue since it means that your windows will not function correctly and will lose energy efficiency.
It is possible to replace double-glazed window's panes, however, it can be costly and is typically only needed in the event that the window is beyond repair. If you are experiencing issues with your double-glazed window but are still in the warranty period, you may be able to get it repaired for free or at lower cost.
It's worth checking the terms of your warranty before you call the company to find out whether they can resolve the problem without replacing the entire window. Double-glazed windows are usually covered by warranties of between 10 and 20 years, so you may find that they are able to repair damaged window units rather than replacing them completely. If this is the case, they'll likely send a specialist out to repair your double glazed windows and will usually be in a position to complete the repair quickly. This is a less expensive alternative to buying and installing new double-glazed windows. It's also better on the environment!
Broken Locks & Handles
When your window handle is damaged or difficult to open, it could be a huge issue as it prevents you from using your windows. This can also give burglars the chance to gain entry into your home. There are several options to address this issue however the most effective option is to get in touch with a uPVC professional. Based on the severity of the issue they will usually be able to fix it for you or at the very least, provide you with an alternative handle.
There are many different types of window locks. However, the most well-known is the Maco or Mila lock that can be found on the majority uPVC frames. These locks use bayonet style rods to lock and these are able to easily seize up. If this happens, the handle's nose will remain in the popped out position and won't be able to return to the locked wedge. This can be a very frustrating problem, but it can be solved with a few simple steps.
To fix the issue you'll need to take off the handle. This is simple enough with a screwdriver. Once the handle has been removed, you should then be in a position to see the screws that hold the lock to the frame. After the screws have been removed, you may try to grab the bolts with an awl or a pair of pliers. If this fails then you can place the tool into the gap between the frame and the window (the gap could be different at each end of the windows) and then make an "u" shape using your hands to grasp the bolts.
If you manage to free up the bolts that shoot, then you can shut your window by adjusting the handle to a closed position. The gearbox (espag or espagnolette.) is probably faulty and won't open by the handle. It is possible to replace the gearbox without the shoot bolts which means that the window can be opened using the handle (and it will remain secure), but you will need to order a new handle and gearbox.
Broken Hinges
It is possible to repair or replace your uPVC windows hinges if they're not functioning smoothly. It could be because the window was opened too tightly or the hinge snapped. Or, they may have a flaw. It's simple to repair the hinge so you don't need to buy new windows.
Take off the hinges. This is done by removing the screws that hold the hinges to the frame. Once the hinges have been removed you can replace the boards using plywood that has been cut to the correct size. Make sure the plywood is more robust than the original board so that it can withstand the weight of the window when open and closed. You'll also want to fill the hole with wood to ensure that the hole left by the old hinge is filled to the brim and won't leak or become loose in the future.
After you've filled holes and replaced the hinges, then you'll need to paint the doors. Make sure you use a high-quality paint to make sure it lasts as long as is possible. Once the paint is dry, you can re-attach the window and tighten any loose screws.
Regular maintenance is also important for hinges on windows. Regularly cleaning the friction stay track and lubricating hinge mechanisms will make them last longer. You can also use wood preservatives to protect them against the elements. This will stop corrosion and ensure they look great for the longest time you can.
double glazing repair -glazed windows can help you save money on heating costs, since it's more energy efficient than windows with a single glazing. However, like any other aspect of your home, windows can suffer from wear and tear and might need repairing or replacing over time. If you're experiencing any of the signs that your double-glazed windows are struggling to operate, it's worth getting them examined by our experts in Preston.