Fitting a Cat Flap

It can be difficult to install the flap for your cat, but with the right guidelines, it's not all that difficult. Decide how high you'd like the cat flap (normally, it is at belly height). Then, mark this area on the door, and use the template provided as a guide to drill.
If you have a kitten who is still a baby and you want to keep the door open, gently prop it slightly open and encourage it to walk through. Reward the kitten as it passes.
Take a measurement of the door
A cat flap allows your pet to move into and out of your home at any time. This can help keep your cat healthy since it will ensure that it is getting enough exercise and also be able to go back inside when it is stranded outside during bad weather. It also can reduce the amount of time you'll have to spend letting it out or in. It will also help protect your home by allowing you to be aware of when it went out.
However, it is essential that the cat flap is correctly fitted to prevent your pet from escaping through it or be pushed through by other animals (e.g. dogs). It is essential to measure the height of your pet's belly as well as the doorway of your house in order to ensure that the flap is at the right height. You can alter the height of your flap in case your cat is smaller or taller than the average.
The next step is to utilize a spirit level mark the center of the door that you will be installing the flap. Then, using the mark as an indication, cut out the contour of the flap on the door with a jigsaw. Once you've cut the space, sand down the edges of the door to create smooth surfaces and drill any fixing holes that are needed.
The installation of a cat flap should not take longer than two hours. The process can be slightly more complicated if you are required to install it on the form of a uPVC door or a composite one. This is because these doors come in various thicknesses, which can impact the way the holes are cut. This is the reason we recommend calling a professional to complete the job, particularly when you've never dealt with glass before.
Measure Your Cat
You will not have to spend hours of ignoring the pet's meow to be let in or out. This is especially helpful for those who work all day and your cat is stuck in the waiting room until you come home in all weathers.
If you are planning to install a cat flap on your door it is important that you measure your cat before attempting the task. It may seem like a simple task, but it is crucial to measure your cat correctly. If not, your cat may have difficulty putting it in use.
Firstly, make sure your cat is calm and not anxious prior to taking the measurements. You'll need to keep them in a manner that they are not able to move, and ensure that the measuring tape or ruler is flat against their body and not bending in any place. You can take a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.
Once you've got the measurement of your cat, it's time to take a look at the door and decide on where to put the flap. It is advisable to position the flap on the highest point of your cat's stomach as it will allow them to get through it without too much effort. This will also prevent the flap from making a lot noise as it moves back and back.
You should consider the thickness of the uPVC or composite door as well. While all timber doors have a similar thickness, uPVC or composite doors may differ in their overall structure. This makes the process of putting in an enclosure for your cat more difficult, as you need to ensure the hole is the right size.
You can also use the template drawing included in the instructions to mark the position of the opening on the door. This will allow you to see where the opening needs to be and also ensure that the template is correctly positioned on the door. Utilizing a spirit level to make sure that the template is in a straight line against the door will also be very helpful.
Cut the Flap
Before you can put in your cat flap you need to cut the door panel in order to make a space big enough to accommodate it. glass cat flap installation near me can be a daunting task so it's recommended you hire a professional to help you if you lack the skills or experience. You can also consult the instructions that come with the kit to learn how to do it correctly.
To do this, you will need to determine the height of your cat or kitten's belly. Use this as an indicator point. As a general rule, place the cat flap about 10-15 centimeters above the ground. This is the average height of the stomach for cats. This will allow your cat to pass through the flap with ease and will make it difficult for other cats or nosy neighbours to enter or exit.
Mark the position of the cat flap on the door using pencil. Then, if your kit has a paper template, lay it over the door and use the markings to drill holes into every corner of the template. Then, you should be able to cut out the template shape and replace it with the flap for cats.
You can put in your cat flap yourself in an uPVC or wood door if you are confident using the Jigsaw. Ensure that you do not cut through any of the door's mullions or vertical rails. You can use a Jigsaw to cut your panel into a circle or square according to the way you'd like it. Take your time and don't make the jigsaw cut faster.
Once the hole is cut then carefully insert the flap of cat food into its new home and make sure that it's securely fixed. If it has screw caps, then push these onto the protruding screws. Once the screws are in place, you can sand any rough edges of the cut and then apply sealant to any gaps to ensure there are no draughts coming into your home.
Place the Flap
If you have a basic cat flap, you can leave it open and encourage your pet to walk through by placing a small amount of cat food in front of the door. You can also try pushing the cat using the help of a stick or your hands. Once glass cat flap installation near me has become comfortable moving through the flap, it will be able to come and go at will. This allows you to let it in and out at any time it's wanted.
It is possible to install a cat flap in the UPVC doors or glass door, however it might not be as simple as installing one in a wooden external door. This is due to the fact that the doors made of UPVC and some kinds of glass doors don't have a uniform thickness. This could have a significant impact on how you cut the flap's hole and how well the flap fits after installation.
Depending on the type of cat flap you pick, it may come with its own mounting kit as well as a template that shows exactly where to drill holes for it. If the kit doesn't include a template, you can photocopy it to make your own. When cutting, it's crucial to not push the jigsaw hard so that you don't create a larger hole than necessary in your door.
The majority of cat flaps are square or rectangular in shape, however there are some that are circular and these are generally more difficult to fit. If you have a circular flap it's important to make sure the hole is in the right location on your door as in the event that it's not, the cat won't be able to use it and could be stranded out in the sun all day (or even at night).
Certain cat flaps come with locks that allow you to determine when your cat enters and leaves. These are very helpful in the event that you are concerned about your cat going out at night and coming back in because of the darkness, or if you're working all day. Some locks can be used for either entrance or exit, while others can be locked both ways. This is useful for sick or older cats who do not want to go outside in bad weather.