Three Greatest Moments In Window Repair History

Window Repairs
Window repairs can help homeowners save money while maintaining their comfort. In the event of major damages, like broken glass or a damaged frame, a replacement window may be required.
However, many other issues can be fixed to prolong the lifespan of your windows. Some common issues include:
Broken or cracked panes
Glass that is cracked could be caused by a lawnmowers that throws rocks at the wrong time or branches of trees being blown by strong winds. This is not only visually awful, but it could cause higher energy bills as the broken pieces allow cold air into your house. Luckily, it's typically easy to repair windows that have broken panes.
Start by carefully removing the glass using gloves and safety glasses. You may have to use a utility knife to break loose the old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the wood of the frame with a soft cloth or paper towel.
Once window repair is clean then apply a waterproof silicone caulking around the perimeter of the frame. This will stop water from getting into the crack, which can cause further damage to both the frame and the glass.
A crack that is severe in double-paned glass may cause gas to leak between the panes, rendering your windows less efficient in insulating. If the crack is so extensive that it is threatening the structural integrity of the window or if the pane inside is not there it is possible to contact an expert.
Cracks in thermal stress can occur when there's a significant difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If this happens on two parts of a window it's recommended to simply replace the pane rather than trying to repair it.
Clear tape can be used to close cracks in windows that aren't yet ready for replacement. It also keeps out bugs and cold wind. You can cut an amount of nylon stocking big enough to completely cover the crack and then glue it to the surface with duct tape. It's not a solution that will last forever, but it works well in a pinch and it keeps cold air and insects out of your home. If you notice cracks or blemishes on your windows that are older You should consult your local business to determine whether replacing the entire window is a better solution.
Rotten Wood
Wood rot is among the most common problems with windows. It can degrade a house's appearance and create a security danger. It is, however, possible to repair rotted wood. The first step is to make sure that the source of the rot has been addressed. This can be done by looking for roof leaks or gutters that are not functioning or cracked caulking, as well as other areas which allow water to penetrate the wood.
You will then need to take out the rotten components of the window frame. This can be done using a claw hammer, chisel, or rasp. After removing the rotten wood, you'll need replace it with fresh wood. Pre-treated wood is recommended for this project since it is resistant to the onset of rot. If you are not able to replace the wood damaged by rot then you can use filler or wood hardener to strengthen the damaged area. Many hardware stores will sell this kind of product. To get the best results, follow the instructions on the label.
After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. Apply a water-resistant sealant the wood. Sikkens for instance is a fantastic product to apply.
Use a two-part epoxy to protect the wood from further damage. It is easy to apply and gives a good finish. However, it is very important to adhere to the instructions for application on the label. When the epoxy filler is dry you can sand the surface of the wooden. It is recommended to begin with a rough layer of sandpaper and then move to a smoother grade.
You do not want to expose the damaged part to further moisture. It is a good idea, so, to cover the surface repaired with an oil-based primer that will protect it from moisture. After that, you can apply the waterproof wood sealant.
The Won't open
There are many reasons windows won't open. Wood frames can warp when exposed to rainy weather, or the house might have sunk or someone could have nailed it shut to protect themselves. However, with a bit of patience and the right tools, many windows that are stuck can be opened.
The accumulation of gunk or debris can be a major cause of windows that aren't opening. Acme Glass notes that dirt and grime build up over time on sliding tracks, hinges and locks. Additionally, metal hardware can be rusty when it comes in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease can prevent oxidation and keep your window operating well.
The pulleys that raise or lower the window could become loose, or even break. These components can lose their tension and become obstructed especially when the window is two or more stories higher than the ground.
If you have trouble opening a door, use a pry-bar to gently open the window. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood and make it easier to move.
A faulty spring can also be the reason for windows that aren't able to raise or lower. Based on the manufacturer of the windows, you'll need to refer to the owner's manual for additional instructions.
If you've tried cleaning the moving parts of your windows and then lubricating them but they're still not opening, it might be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows of your home become functional to useless. If your windows aren't properly shut can expose your home to water damage and burglary. Contact our team for more information about our windows replacement services and products today!