Fitting a Cat Flap

Installing a cat flap might seem intimidating but it's simple to install with the proper instructions. Determine how high you would like the flap to be (normally it's at the belly height). Note this on the door, and use the template as a guide to drill.
If you have a kitten who is still a newborn then gently prop the door slightly open and allow it to walk through. Reward the kitten each time it passes.
Measure the Door
A cat flap is an excellent option to let your pet come and go inside and out of your house as it wants. This will keep your cat healthy since it will ensure that it is exercising regularly and will also allow it to go back inside when it is stranded outside during bad weather. It can also cut down on the amount of time you need to let it out or in and can also keep your home safe by letting you know when it has gone out.
It is important to make sure that the cat flap is set up correctly in order to prevent your pet from being pushed through or escaping through it by other animals (e.g. dogs). It is crucial to determine the height of your pet's belly and the doorway of your house in order to make sure that the flap is at the correct height. If your cat is larger or shorter than the average, you can adjust the flap's height by moving it upwards or downwards by a small amount.
The next step is to make use of a spirit level to mark the center of the door, where you will install the flap. Using the marking as a guideline, you can use an jigsaw to cut the shape of the flap in the door. After you've cut the flap, sand down the edges to create smooth surfaces. Drill any necessary holes.
Installing a cat flap ought to not take more than two hours. However, the process can be a bit more difficult in the event that you have to put it inside the frame of a uPVC or composite door because these doors have various thicknesses, which affect how the holes are cut and the type of door they are fixed into. We always recommend to contact a professional when this is your first experience working with glass.
Measure Your Cat
You can avoid hours of ignoring the pet's meow to be let in or out. This is especially helpful when you're at work most of the day and your cat is stuck inside waiting until you get home regardless of the weather.
It is crucial to measure your cat's measurements first before you begin the installation. Although it might seem like an easy task, it is essential to measure the right way or your cat will find it very difficult to use.
First of all, make sure that your cat is calm and not feeling stressed before you take the measurements. You will need to hold them in a way that they are not able to move, and ensure that the measuring tape or ruler is flat against their body and not bending in any way. You can get a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.
Once you've determined your cat's measurement, it's time to examine the door to decide where to place the flap. A good tip is to position the flap at the height of your cat's belly as this will help them to pass through it without much effort. This will also stop the flap from making a lot noise as it swings back and back.
You will also need to take into consideration the thickness and structure of the uPVC door or composite. While all timber doors have a similar thickness, uPVC or composite doors may differ in their overall structure. This could make the process of the installation of the flap for your cat more difficult, as you have to make sure that the hole is the proper size.
You can also use the template drawing included in the instructions to mark the position of the hole in the door. just click the following web page will allow you determine where the opening must be and also make sure the template is correctly positioned on the door. Using a spirit-level to make sure that the template is right against the door will also prove beneficial.
Cut the Flap
Before you can install your cat flap, you'll have to cut the door panel to make a space big enough to accommodate it. It can be a difficult job, so it's recommended that you hire a professional to assist you if you do not have the knowledge or skills. You can also consult the instructions that come with the kit to learn how to do it correctly.
To do this you need to measure the height of your cat's or kitten's belly. Use this as an indication point. A good rule of thumb is to set the flap of your cat about 10 centimeters off the ground, as this is roughly the average height of the cat's belly. This way, your cat can move through the flap without difficulty and it will also give other cats or snooping neighbours a tough time trying to get in or out.
Once you've determined the location where the cat flap needs to be placed, mark this location on the door using the help of a pencil. If your kit comes with the template you can place it on the door. Use the marks on the template to drill holes at every corner. After that, you'll be able to cut the template and replace it with the flap for cats.
You can install your cat flap yourself inside a wood or uPVC door if you are confident using the Jigsaw. Be sure not to cut through the vertical rails or mullions of your door. You can use a jigsaw to cut your panel into a square or a circle depending on the way you'd like it. Be patient and don't make the jigsaw cut faster.
After the hole has been cut then carefully insert the flap of cat food into its new location and make sure that it is securely fixed. If the flap is fitted with screw caps put them on the protruding bolts. Once the screws have been installed smooth the edges and apply sealant to any gaps. This will stop drafts from entering your home.
Install the Flap
If you have a simple cat flap, you can leave it open and encourage your pet to use it by placing a small amount of cat food in front of the door. Alternatively you can try pushing the cat through using your hands or with a stick. Once your cat is accustomed to moving through the flap, it will be in a position to move as it pleases. This allows you to let it in and out as it's wanted.
You can fit a cat flap into the UPVC or glass doors but it's not quite as straightforward as fitting it into a wooden external door since the UPVC and glass doors aren't a uniform thickness. This can have a dramatic effect on the way you cut the hole for the flap and could affect the way your flap fits correctly once it's installed.
Depending on the type of cat flap you pick It may be equipped with a mounting kit as well as a template that will show exactly where to drill the holes for it. If the kit does not include a template you can create one yourself. It's important to not push the jigsaw too in order to cut, so it doesn't create a larger than needed hole in your door.
Most cat flaps are rectangular or square in shape but there are also some which are circular, and they are typically more difficult to fit. If you have a circular flap, make sure that the hole is in the correct spot on your door. In the event that it is not, the cat might not be able to use it, and may be locked outside for the entire day (or night).
Some models of cat flap have locks which let you control the time your cat comes and goes. These can be very useful in the event that you are worried about your pet going out at night only to come back in because of the darkness, or if you're at work for the entire day. Some locks can be used to lock access or exit, and others can be locked in both directions. This is useful for sick or elderly cats who do not want to go outside in bad weather.