The 3 Greatest Moments In Automotive Key Repair History

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition
We've all been there - the car key won't turn on the ignition. It can occur at the most inconvenient time, such as when you're filling your car with groceries or heading home from work.
Rather than panic, there are several different solutions to get you back on the road. Here are some common car key repair issues and solutions for them:
Broken or bent keys
The most frequent reason an owner of a car cannot start their car is a bent key. This can be easily repaired by simply bending the key. It may sound simple, but it is important to do it carefully. The key is extremely thin and bending it just a little can cause it to break.
You'll need a solid work surface and a pair of pliers to do this. Take the key on one end with the pliers, then bend it until it is straight. This is best done on a flat surface, or in a vise. Then, you can put it in the lock to see whether it turns.
If not, you might need to get a new one made. This will avoid having to call a locksmith, and will ensure your key works.
It's a good idea to keep a spare in your pocket so that you don't end up without a way into your vehicle in the event of a lost key.
If you are having trouble inserting a bent or broken lock key, try applying grease to it. This will make it easier to move through the cylinder and will prevent it from getting stuck. You can use graphite or spray lubricant. If using a spray, ensure you attach the plastic tubing that came with it to ensure an easier application. This will also help prevent water from destroying your important.
Stuck pins or springs
A pin (also known as a roll pin or a spring) can get stuck. Pins are a small piece of metal that measures between 5.1 and 7.6 cm (2.5-3.0 in) long and has hollow ends. It is used to connect two components of machines. In most cases, you can take a nut off by pulling it out with your fingers or using a wrench.
If you own an older car that uses a microchip key it is likely that the key will need to be programmed to work with your car. This procedure can differ based on the car and manufacturer.
If you require assistance with your car keys or locks, give us a call! We can repair or replace every vehicle key.
Gear selector
It's important to get your vehicle to a mechanic as quickly as you can if the gear selector is stuck in park. This is a security issue and you could cause serious vehicle damage if continue driving. This could also indicate bigger problems with the transmission itself, which can be expensive to fix.
Most times this issue is easily fixable. Most of the time, the cable end that is attached to the lever can snap or break off. This is a simple fix, and the mechanic can usually make it within a few minutes.
In some cases, however, the gear selector bushing may be damaged or worn out. These are rubber covers that go around articulation points in the gear system to aid in making it move more smoothly. They perform the same function to cartilage in your knees so it's crucial that they stay in good shape and soft.
It is not uncommon for them to wear out over time, but there are a few things you can do to extend their life. First, you should avoid using the gear selector in extremely cold weather. This is because the gear control cables are prone to freezing and cracking. It is recommended to replace the bushings with premium quality ones, like those from First Line.
These bushings are an essential element of your gear selector and should not go unnoticed. If you notice that yours is worn out you must visit an auto repair shop that is specialized in Land Rover repairs. These experts can help find the right parts to fix the gear selection system. They also offer a variety of other services, including transmission maintenance and service.
Dead battery
If you turn on your key in the ignition and hear nothing except a click, your battery is dead. As batteries age, they undergo an natural process that causes them to die prematurely. This is because the negative plates in the battery in your car begin to become coated with sulfate crystals.
A dead battery can also cause you to lose the power source in your car and cause the radio or the electric windows to fail. If you've had difficulty starting your car during cold weather, this could be a sign you require an upgrade to your battery.
It's possible that your issue is not due to a dead battery but a malfunction in the charging system. Having your mechanic check to verify that the alternator, serpentine belt and battery cables are all working correctly can resolve this issue.
Key fobs that are not functioning properly is another common problem for automotive key repair. The key fob is a tiny unit that connects to the computer in the vehicle and relays signals and commands between the engine and accessory systems. The system may become confused or stop communicating with your vehicle when it is exposed to extreme temperatures or is wet.
It is possible to reset a lost key fob by following the instructions provided in the owner's manual. Depending on your vehicle it may be necessary to open and close the doors, turn lights and other electronic devices off and on by pressing a specific sequence of buttons, or even close and open the windows. If this doesn't fix your fob, it might require professional programming, which will require an expert technician. Try these easy methods before you buy the new fob.
Ignition socket
Modern car keys come with a transponder chip embedded in them that transmits signals to a receiver in the ignition when they are inserted. The signal informs the immobilizer inside the car whether the key is the right one to allow it to start. In the 1990s, car theft became an issue. remote car key repair installed this transponder system to ensure safety and insurance reasons.
If you have a newer vehicle, the only option to replace your key could be through the dealership or by contacting the manufacturer directly. Before you go there make a note of the VIN number of your vehicle (vehicle identification number). This number is usually found on the dashboard, the door jamb or in the owner's guide.
Bring your existing working key to an AutoZone participating store. A representative will use a machine that will trace the contours of the blank key to precisely duplicate the original key. They will then cut the new key with a precise cutting machine onsite. If your key is blade style or key fob or has a large black or grey head on it, it'll have to be programmed to your specific vehicle before it can be used to start the engine.