10 Hook Locks For Doors Techniques All Experts Recommend

Types of Deadlocks for Doors
Hook bolt deadlocks are used on sliding narrow stile aluminum storefront doors to enhance lock strength and security. The locks come with keys on both sides that allow for greater flexibility.
To accurately measure a new lock to your door, first determine the depth of the case (or backset). This is the distance between the edge of the front door and the center of the latch hole.
Tubular Latch
The tubular latch is the most well-known type of door latch. It's simple to install and is a favorite of DIY enthusiasts and Joiners alike. my website 's also available in a wide range of sizes, shapes and quality levels to suit any door handle style.
A tubular latch is a rectangular steel casing fitted with a latch bolt and a latch follower with springs (also known as a striker). When you open the door, the latch retracts allowing you to lock and shut the door. When you shut the door, the latch bolt then springs back to meet the edge of the frame and close the door.
If you're fitting a tubular latch, it is important to decide on the height you'd like the latch rest on the door. A lot of people think that a metre from the floor is the ideal level to place a latch and door handle. However, this isn't the situation. The latch on the door knob should be placed in the middle of the rail. This is where the bulk of the weight is transported by the door when it's opened and closed.
Note the location of the hole in the door and strike plate with a pen once you have determined the location where the latch should go. Drill pilot holes to secure the plate. Once you've drilled them, use a countersink bit to ensure that the back of the plate is in line with the door once it's screwed.
If you want a heavier-duty alternative to the standard tubular latch, consider choosing a double sprung variant. The door will shut more smoothly when you choose this latch because it comes with a separate spring to move the tongue. It also has a powerful spring on the spindle follower, ensuring that doorknobs or levers return to their horizontal positions after every use.
After you've attached the latch to the door, you'll have to fit a strike plate to the frame. The strike plate is a piece that can be fitted into the space left by the latch after it's been closed. To accomplish this, mark the location you want the strike plate sit on the frame section that is surrounding it. Use your knife to cut an appropriate square for the plate, and then take it off.
Cylindrical Latch
Interior doors are typically equipped with cylindrical locks. They are used in offices and homes and are extremely versatile in terms of their applications. Cylindrical locks function similar to mortise lock systems but are much less complicated and easier to install. They do not require a pocket or "mortise," to be cut into the door's frame like mortise lock systems do. They are simply installed into a hole, or bore, that is cut into the door face. They are available in different grades and can be used with knobs and levers to open and close the door.
The primary distinction between mortise and cylinder locks is that only a particular key can unlock these types of locks. The pins are fixed by springs and pins with different sizes. Once this link has been used into the cylinder, the pins will align with each other which allows the cylinder to rotate. This enables the latch bolt to retract so that the door can be opened.
When the wrong key is used, the pins aren't aligned correctly and prevent the cylinder moving. It's important that you use the correct key to gain access to your home or office.
The cylinder is situated within the door's body and is connected to the operating trim by either a half-round or square extension. There are also small notch-like notches cut from the cylinder's sides that correspond to key notches, and they are designed to align when the correct key is inserted. When the cylinder is moved, it will also move the latch bolt with it.
A strike plate is an attached metal plate that holds the bolt of the lock that is projected. The strike plate is typically constructed from heavy-gauge steel and attached to the door frame using screws. It also has a strike opening into which the latch bolt of the lock engages.
When replacing a cylindrical lock make sure to use the proper tools to remove the old lock's handle or knob and latch bolt. Once the old hardware is removed, mark the location of the new latch bolt and strike opening on the door as well as the door frame. When the latch bolt and strike plate are in place, it's a great idea to test the operation of the lock by pushing against it with your finger. If the latch bolt or strike plate is damaged or doesn't operate correctly, you should consider replacing the bolts and strike plates.
Key-Locked Latch
This type of lock is controlled by a key from the outside, and a knob or lever on the inside. This type of lock is suitable to secure doors that aren't at risk of being interfered with, such as in offices. This type of lock permits the outside lever to either be locked or unlocked while the inside knob/lever is free to be used for immediate exit. The key is only required to retract the latchbolt once the door is closed.
The pins in a keylock are oriented and lined up along a line known as the shear line. These pins are aligned with the shearline when the key that is needed is placed into the lock. The plug is then turned to release latchbolt. If you've ever experienced a lock that was perfectly aligned, but the lock was not able to open or the lock would not open, one of the pins might be out of alignment with the shearline.
Face plates can also be found on a few locks. They can be decorative or provide strength and security to the locking mechanism. These plates are typically found on mortice locks, rim locks, and locks with reversed springs.
There is also a strikeplate, which is typically connected to the jamb and frame of the door and is fitted with a hole to guide the bolt from the cylinder to the lock. This is often utilized alongside deadbolts for added security.
Finally, there is the cylinder, which holds a series of pins that align with the key's axis to stop it from turning. It can be difficult to choose the best cylinder without the proper tools and the right knowledge. To lock doors it is necessary to turn the key turned in the same direction as the door is opened. If the door opens with the right hand, for instance, the key will need to be turned clockwise in order to secure the door. To unlock, turn the key counterclockwise. This differs from other locks, such as Chubb locks that require you to turn your key in the opposite way of opening the door.
Keyless Latch
A keyless latch allows you to lock and unlock your door without a traditional key. These locks can be operated with a smartphone app or an access code and some models include a hidden camera for added security. When selecting a keyless lock, consider your security needs and compatibility with your existing hardware and doors. Read the instructions of the manufacturer and specifications prior to installing. Some keyless locks may require special door modifications or preparations.
Many companies are working on smart locks that replace traditional locks with keys, and adds security features. These devices are more durable and can be unlocked with the use of a code, fingerprint or facial recognition. Some smart locks have the ability to detect tampering, and detect if a door is opened with an unauthorised key or force.
One company, named Latch has come up with a sleek high-tech lock that functions similar to other smart locks. Its primary market is real estate companies that manage apartments. The lock can be opened by using a key, passcode or mobile phone, and tenants are able to let in cleaners, dog walkers, or out-of-town guests with temporary codes. The company claims that this will eliminate the requirement for tenants to lose their keys, and reduces maintenance costs because there is no requirement to change locks when the tenant leaves.
The Latch lock may not be available to the general public yet, but it could find a place in large apartments or condos. It's currently being tested in a handful of locations and the company is planning to launch more units this year. The price is roughly the same as a standard lock, and the company also offers an affordable price and low costs for software.
The Latch App is a great tool to determine the doors that are shown as shortcuts, and you can change this at any time. To do so, start the app and then select the menu located in the upper left-hand corner of the screen. Then select 'Widgets', and select the doors you wish to display as shortcuts. You can see the history of access to your doors on the Latch App after you have set up them.