Matchrelated actual efficiency throughout expert football Place or person certain

Wafer-level probing of photonic integrated circuits is key to reliable process control and efficient performance assessment in advanced production workflows. In recent years, optical probing of surface-coupled devices such as vertical-cavity lasers, top-illuminated photodiodes, or silicon photonic circuits with surface-emitting grating couplers has seen great progress. In contrast to that, wafer-level probing of edge-emitting devices with hard-to-access vertical facets at the sidewalls of deep-etched dicing trenches still represents a major challenge. In this paper, we address this challenge by introducing a novel concept of optical probes based on 3D-printed freeform coupling elements that fit into deep-etched dicing trenches on the wafer surface. Exploiting the design freedom and the precision of two-photon laser lithography, the coupling elements can be adapted to a wide variety of mode-field sizes. We experimentally demonstrate the viability of the approach by coupling light to edge-emitting waveguides on different integration platforms such as silicon photonics (SiP), silicon nitride (TriPleX), and indium phosphide (InP). Achieving losses down to 1.9 dB per coupling interface, we believe that 3D-printed coupling elements represent a key step towards highly reproducible wafer-level testing of edge-coupled photonic integrated circuits.A limiting factor in organic solar cells (OSCs) is the incomplete absorption in the thin absorber layer. GSK525762 One concept to enhance absorption is to apply an optical cavity design. In this study, the performance of an OSC with cavity is evaluated. By means of a comprehensive energy yield (EY) model, the improvement is demonstrated by applying realistic sky irradiance, covering a wide range of incidence angles. The relative enhancement in EY for different locations is found to be 11-14% compared to the reference device with an indium tin oxide front electrode. The study highlights the improved angular light absorption as well as the angular robustness of an OSC with cavity.Subwavelength grating (SWG) waveguides have been shown to provide enhanced light-matter interaction resulting in superior sensitivity in integrated photonics sensors. Narrowband integrated optical filters can be made by combining SWG waveguides with evanescently coupled Bragg gratings. In this paper, we assess the sensing capabilities of this novel filtering component with rigorous electromagnetic simulations. Our design is optimized for an operating wavelength of 1310 nm to benefit from lower water absorption and achieve narrower bandwidths than at the conventional wavelength of 1550 nm. Results show that the sensor achieves a sensitivity of 507 nm/RIU and a quality factor of 4.9 × 104, over a large dynamic range circumventing the free spectral range limit of conventional devices. Furthermore, the intrinsic limit of detection, 5.1 × 10-5 RIU constitutes a 10-fold enhancement compared to state-of-the-art resonant waveguide sensors.Polarization aberrations exist in almost all astronomical telescopes. Polarization aberrations would bring about asymmetric apodization in the exit pupil, leading to asymmetric PSFs. The shape of PSFs is critical to telescopes that are used to detect weak gravitational lensing (WGL) in the universe. In this paper, polarization aberrations and their connections with PSF ellipticity in an unobscured off-axis space telescope are analyzed. Together with the Jones pupil, cumulative diattenuation and retardance maps of the telescope are obtained via polarization ray tracing. Due to asymmetric apodization caused by polarization aberrations, the ellipticities of all four PSF components are found to be greater than zero. The PSF ellipticity of the telescope over the full FOV is obtained. Results show that polarization aberrations change PSF ellipticity in different degrees at different FOVs. The maximum variance of PSF ellipticity induced by polarization aberrations is 7.5e-3 and the average value is 2.7e-3. In addition, interpolation errors of PSF ellipticity would also be affected by polarization aberrations. It is found that there are 405 FOV points (about 4% of all FOV points involved in the calculations) whose variances of interpolation errors caused by polarization aberrations are greater than 1.4e-4. According to the results shown in this paper, polarization aberrations of telescopes play a significant role in WGL measurements.Multifocal structured illumination microscopy (MSIM) can rapidly retrieve 3D structures of thick samples by using multi-spot excitation and detection. Although numerous super-resolution (SR) and optical sectioning (OS) methods have been introduced in this field, the existing OS-SR method in MSIM still has the difficulty in rejecting deep defocused light, which may lead to strong background signal in the retrieved results. To this end, an enhanced OS-SR method is proposed to simultaneously achieve the desired OS capability and significant resolution improvement in MSIM. The enhanced OS-SR image is obtained by combining the standard deviation image with the conventional OS-SR image in the frequency domain. The validity of the proposed method is demonstrated by simulation and experimental results.In this work, a new recognition method of orbital angular momentum (OAM) is proposed. The method combines mode recognition and the wavefront sensor-less (WFS-less) adaptive optics (AO) by utilizing a jointly trained convolutional neural network (CNN) with the shared model backbone. The CNN-based AO method is implicitly applied in the system by providing additional mode information in the offline training process and accordingly the system structure is rather concise with no extra AO components needed. The numerical simulation result shows that the proposed method can improve the recognition accuracy significantly in different conditions of turbulence and can achieve similar performance compared with AO-combined methods.We propose a scheme of high-speed physical key distribution based on dispersion-shift-keying chaos synchronization in two semiconductor lasers without external feedback (response lasers), which are driven by a common external-cavity semiconductor laser (drive laser). In this scheme, the dispersion introduces a laser field beating-induced nonlinear transformation to the outputs of drive laser and renders the correlation elimination between the drive and response lasers improving the security of key distribution. Moreover, the commonly driven lasers without external feedback constitute an open-loop synchronization configuration and yield a short synchronization recovery time of a subnanosecond supporting the implementation of high-speed key distribution. With these two merits, we numerically demonstrate a 1.2 Gb/s secure key distribution with a bit error ratio below 3.8×10-3.