10 Hook Locks For Doors Techniques All Experts Recommend

Types of Deadlocks for Doors
Deadlocks with hook bolts are used on sliding narrow stile aluminum storefront doors to increase security and strength of the lock. The locks come with keys on both sides that allow for greater flexibility.
To accurately measure for a new lock, first determine the door's case thickness (or backset). This is the distance from the edge of the door to the center of the latch hole.
Tubular Latch
The tubular latch is the most well-known door latch. It's simple to install and is an absolute favorite among DIY enthusiasts and joiners alike. It's also available in a large assortment of sizes, shapes and quality levels to suit any style of door handle.
A tubular latch is a rectangular steel casing that has a spring-loaded followinger and a latch bolt (also called a striker). When you open the door the latch retracts, allowing you to shut and lock it. When you close the doors, the latch bolt springs back and grabs the edge of frame to secure the door closed.
You'll need to decide on the height of the door's latch before installing it. Many people believe that a lock and handle should be positioned at a height of 1 millimetre above the floor. But this isn't always the situation. When door knobs are involved the latch should be situated on the mid-rail - this is where most of the weight is carried when you open and close the door.
Once you've determined where the latch will sit then mark the location of the hole in the door and on the strike plate using a pencil. Then drill pilot holes for the screws that are used to attach the plate to the door. After drilling the pilot holes, use a countersink to ensure the plate's backside will sit flush with the door after it's screwed in place.
If you are looking for a more robust alternative to the standard tubular latch, consider selecting a double-sprung version. The door will close more smoothly when you use this type of latch, since it comes with a separate spring that moves the tongue. It also features a strong-action spring-loaded spindle tracker that ensures that doorknobs and levers are returned to their horizontal position after each use.
After you've secured the latch to the door, you'll need attach a strike plate to the frame. The strike plate is the part that sits in the gap that is left by the latch when it is closed. You should mark the area in which you'd like to place the strike plate on the frame surrounding it. Then, use the knife to create an area that is square for the plate and remove it.
Cylindrical Latch
Cylindrical locks are commonly used on interior doors. They are used in offices and homes, and can be found in a wide range of applications. They are similar to mortise locks, however they are simpler and faster to install. They don't require a "mortise" or pocket be cut into the door's frame as mortise locks do. locks 4 vans hook lock or bore is cut into the face of the door and they are inserted into that. These locks are available in various sizes and are compatible with knobs and levers to open and close the door.
The main difference between mortise and cylinder locks is that these locks can only be opened using keys of a particular type. The pins are secured by springs and pins with different heights. When the right key is inserted and the pins are aligned with each other and the cylinder is able to rotate. This enables the latch bolt to retract and the door can be opened.
When the wrong key is used and the pins aren't aligned correctly, and they stop the piston from moving. This is the reason it's essential to select the correct key when you have to enter your business or home.
The cylinder is a part of the door's body and is connected to the operating trim using a square or half-round extension. The cylinder also has small notch on its sides that are designed to be aligned with the key notches once the correct key is placed. Once the cylinder is moved, the latch bolt will follow.
A strike plate is a metal plate that attaches to the door frame and captures the bolt of the latch that is projected to the lock. The strike plate is generally constructed of steel that is heavy-gauge and attached to the door frame using screws. It also has a strike opening which the latch bolt of the lock fits.
Make use of the appropriate tools to remove the handle or knob of the old lock and the latch bolt. Once the old hardware is removed, mark the location of the new latch bolt and strike opening on the door and door frame. Once the latch bolt and strike plate are in position, it's a good idea to test the operation of the lock by pushing against it using your finger. If the latch bolt or strike plate is damaged or doesn't function properly, you must look into replacing the bolts and strike plates.
Key-Locked Lock
This type of lock is controlled by a key from the outside, and a lever or knob on the inside. This type of lock is used to secure doors that aren't susceptible to being tampered with, like in offices. This type of lock allows the outside lever to be either locked or unlocked, while the inside knob/lever is always free for immediate egress. The key is required only to retract the latchbolt once the door is shut.
The pins in a keylock are oriented and lined up on a line called the shear line. When the key that is correct slides into a lock, these pins are aligned with the shear line, and the plug can be turned to release the latchbolt. If you've had a lock that was perfectly aligned but the key would not open it is possible that one of the pins could be out of alignment with the shearline.
Some locks also have faces plates, which is mounted on the door's edge and can be decorative and add protection and security to the locking mechanism. These plates are typically found on mortice locks, rim locks, and locks with reversed springs.
There is also a strikeplate, that is typically connected to the door frame and jamb and is fitted with a hole to guide the bolt from the cylinder into the lock. It is typically used together with deadbolts to provide additional security.
The cylinder is the final component, and it has pins that are aligned with the key's edge to stop it from turning. A good quality cylinder is extremely difficult to break into without the proper tools and knowledge of how to open it. To lock the front door, you must turn the key in the same direction as the door opens. If the door opens using the right hand, for instance, the key will need to be turned clockwise to secure the door. To unlock the door, the key needs to be turned counterclockwise. This is different than other locks, such as Chubb locks, which require you to turn your key in the opposite direction of opening the door.
Keyless Latch
With a keyless latch you can lock and unlock your doors without a traditional key. The locks can be operated using a smartphone app or an access code, and some models even have a hidden camera to provide added security. When choosing a keyless latch take into consideration your security requirements and compatibility with your hardware and doors. Read the instructions of the manufacturer and specifications before installing. Certain keyless locks could require special door modifications or preparations.
Many companies are working on smart locks that replace traditional keyed locks and provide additional security features. These devices can be unlocked by the use of a fingerprint, code, or facial recognition, and are typically more durable than traditional locks. Certain smart locks also come with tamper-proof features and can detect when a door has been opened using a key that is not authorized or force.
One company, known as Latch, has developed an attractive high-tech lock that functions similar to other smart locks. Its primary customers are real estate companies who manage apartment buildings. Renters can unlock the lock with a passcode, a key or mobile device. They can also allow in cleaners, dog walkers or guests from outside of town with temporary codes. The company claims that this will eliminate the requirement for tenants to lose their keys, and also reduces maintenance costs since there is no requirement to change locks if tenants move out.
While the Latch lock isn't yet available to the public yet but it is likely to find a place in large condos and apartments. It's already being tested in a few locations, and the company plans to release more units this year. The price is roughly the same as a standard lock, and the company also offers low prices and affordable costs for software.
The Latch App is a great tool to set up which doors are shown as shortcuts. You can change this at anytime. To do so, open the app and select the menu located in the upper left-hand corner of the screen. Then select 'Widgets', and choose the doors you would like to show as shortcuts. Once your doors are set you can see access history within the Latch App.