7 Simple Secrets To Totally Rocking Your Window Repair

window repairs can save homeowners money and help keep their homes comfortable. Window replacement is often required in the event of severe damage like broken glass or a shattered window frame.
Many other problems can be solved to prolong the lifespan of windows. Common problems include:
Broken or cracked Panes
Cracked windows could be caused by a lawnmowers who throws errant rocks or by branches of trees being blown by strong winds. This is not only visually awful, but it could cause higher energy bills because the broken pieces allow cold air in to your home. Fortunately, it's generally simple to repair windows with cracked panes.
Begin by carefully removing glass using gloves and safety glasses. You may need to make use of a utility knife in order to remove any remaining putty or glazing compound that has accumulated around the edges of the frame. Then, use a soft paper towel or cloth to clean the glass's surface and the wood of the frame.
Once the area is clean and dry, apply a waterproof silicone caulking to the perimeter of the frame. This will stop water from leaking into the frame through the crack and result in further damage.
A bad crack in double-paned glass may cause gas to leak between the panes, which can make your windows less insulative. If the crack is significant enough to threaten the quality of the glass or in the case of an inner pane that's completely missing, it's time to contact an expert.
Cracks in thermal stress can happen when there's a dramatic difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If this happens across two windows it's best to replace the glass instead of trying to repair it.
Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It can also keep out cold winds and bugs. You can even cut a piece of nylon stocking or tarp sufficient to cover the crack and glue it in place with duct tape. This isn't a permanent fix, but it will keep insects out and cold air away from your home. If your windows are old and you're beginning to see cracks in the glass, it's an excellent idea to talk with your local window company about whether replacing the entire window would be the best option for you.
Rotten Wood
Wood rot is a frequent problem with windows. It can degrade a house's appearance and pose a safety hazard. It is possible to repair rotted wood. The first step is to ensure that the source of the rot has been dealt with. Look for leaks on the roof and other places where water can enter the wood.
The next step is to remove the rotten parts of the window frame. This can be accomplished with an axe, a claw hammer, or rasp. After the rotten areas have been eliminated then you must replace them with fresh wood. Pre-treated wood is suggested for this project since it is resistant to the onset of rot. If you are unable to replace the timber that has rotted you can apply wood filler and hardener to repair the damaged area. Many hardware stores will carry this type of product. To get the best results, adhere to the directions on the label.
After you have replaced the decayed areas of the windowsill, it is essential to protect the newly-repaired area. This can be done by applying an water-resistant wood sealant. A product such as Sikkens is a good choice for this job.
Make use of a two-part epoxy to protect the wood from further damage. This product is easy to apply and leaves a beautiful finish. It is essential to follow the directions on the label. Once the epoxy filler has dried, you can smooth the surface of the wood. Start with a rough sandpaper, then move to more smoother grades.
You do not want to expose the damaged area to more moisture. Therefore, it is a good idea to cover the area that has been repaired with an oil-based primer that will help protect it from moisture. After that, you are able to reapply the wood sealant, which is waterproof.
It won't open
There are many reasons why windows don't open. The house could have settled or the wooden frames might have warped due to rainy weather. There is also the possibility that someone nailed them shut for security. With a bit of patience and the right tools you can unlock most stuck windows.
One of the most common causes of windows that isn't opening is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks and locks. Metal hardware can also rust if it comes in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease will help prevent oxidation and keep your window working well.
Stuck windows could be caused by an unintentional break or loosening of the pulleys that are used to lift and lower the window. These parts can be weakened and obstructed when they are placed higher than two floors higher than the surface.
If you're having difficulty opening the window, try using a pry bar to gently push the window to open a bit at one time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try applying a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.
A faulty spring can also be the reason for a window that won't raise or lower. You'll need to check your owner's guide for more details depending on the person who made your windows.
If you have tried cleaning the moving parts of your windows and then lubricating them but they're still not opening, it might be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows go from functional to inoperable, as windows that aren't properly closed can leave your home vulnerable to burglary and water damage. Contact us for more information about our replacement windows and services today!