12 Companies Leading The Way In Window Repair

Window Repairs
Window repairs can help homeowners save money and ensure their comfort. Window replacements may be required in the event of severe damage like broken glass or a shattered window frame.
Other issues can be fixed to extend the longevity of windows. The most frequent issues are:
Cracked or broken Panes
Cracked windows could be caused by a lawnmower that throws rocks in the wrong direction or the blow of a tree branch by strong winds. It's not just visually bad, but it can also lead to higher energy bills as the broken pieces let cold air into your home. Fortunately, it's generally easy to fix windows with cracked panes.
Start by carefully removing glass with gloves and safety sunglasses. You may need to use an utility knife to loosen old glazing compound or putty around the frame's edges. Next, wipe down the glass's surface and the frame's wood with a soft cloth or paper towel.
Once the area is clean and dry, apply a waterproof silicone caulking around the frame's perimeter. This helps prevent water from getting into the crack, which can cause further damage to both the frame and the glass.
A bad crack in double-paned glass can cause gas to leak between the panes, which can make your windows less insulative. If the crack is severe enough that it compromises the strength of the window or if the inner pane is missing, you may need to contact a professional.
Thermal stress cracks can also occur when there's an extreme difference in temperatures between the inside and outside of your home, causing the glass to expand or contract. If the cracks are situated on two sides of a glass, it is recommended to replace it rather than try to repair it.
Clear tape can be used to close cracks in windows that are not yet ready for replacement. It also keeps out bugs and cold wind. You can also cut a nylon stocking large enough to cover the entire crack, and then attach it using duct tape. This isn't an end-to-end fix, but it will keep insects and cold air away from your home. If your windows are old and you're beginning to see cracks in the glass, it's an excellent idea to talk with your local window manufacturer to determine if replacing the entire window would be a better solution for you.
Rotten Wood
Wood rot is a common issue with windows. It can damage a home's appearance and create a security hazard. However, it is possible to fix rotted wood. The first step is to make sure that the source of the rot has been addressed. This can be accomplished by checking for roof leaks and gutters that aren't functioning or cracked caulking, as well as other areas that allow water to get into the wood.
You will then need to remove the rotten parts of the window frame. This can be done with a rasp, chisel or claw hammer. After the areas that are rotten have been cleared then you must replace them with new wood. It is recommended that you make use of pre-treated wood for this project since it is resistant to rot. If you are unable to replace the wood that has been damaged, you can try using wood filler or hardener to help strengthen the damaged area. Most hardware stores will carry this type of product. To get the best results, make sure you follow the directions on the label.
After you have repaired the damaged areas of the window sill, it is important that you protect the area. This can be done by applying a waterproof wood sealant. Sikkens, for example is a fantastic product to use.
You can also use an epoxy filler with two parts to shield the wood from further damage. This product is easy to apply and leaves a nice finish. However, it's important to follow the application instructions on the label. Once the epoxy filler has dried, you can sand the surface of the wood. It is best to begin with a rough layer of sandpaper, and then progress to a smoother grade.
You do not want to expose the rotted part to more moisture. It is recommended, that's why you should protect the surface you have repaired with an oil-based prime that will protect it from water. Then, you can apply waterproof wood sealant.
The W won't open
There are many reasons why windows won't open. The house may have settled or the wooden frames may have warped in humid weather. Somebody may have nailed them shut for security. With a little patience and the right tools, you can unlock most stuck windows.
The accumulation of gunk or debris can be a major reason of windows that aren't opening. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges, and locks. In addition, metal hardware is prone to rust when it comes into contact with humidity or direct sunlight. Maintaining these areas lubricated by spray grease will help prevent corrosion and keep your window operating well.
Stuck windows could be the result of a loosening or breakage of the pulleys used to lift and lower the window. These parts can lose their tension and get blocked especially when the window is situated at least two stories above the ground.
If you're having difficulty opening windows, try using a pry bar to gently push the window open a little at a time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try applying window repairs along the frame's edges for several minutes. This will warm the wood, making it easier to move.
A faulty spring can also be the cause of a window that won't lift or lower. Depending on who manufactured the windows, you'll have to consult the owner's manual for additional instructions.
If you've tried cleaning and lubricating the moving parts of your windows, but they still aren't opening, it may be time to replace the windows. Homespire Windows & Doors provides windows that are energy efficient. Don't let windows in your home go from being functional to useless. If your windows aren't properly closed could expose your home to burglary and water damages. Contact us today for more information on our replacement windows as well as our services!