5 Laws That Will Help The Window Repair Industry

Window Repairs
Window repairs can save homeowners money and help keep their homes warm. Window replacement is often required in the event of serious damage such as broken glass, or a window frame that has been smashed.
Many other problems are fixable to extend the longevity of windows. Common problems include:
Broken or cracked panes
Glass that is cracked can be caused by a lawnmowers who throws rocks at the wrong time or the blow of a tree branch by strong winds. It's not just visually terrible, but it could also lead to higher energy bills as broken glass lets cold air in to your home. It's fairly simple to repair windows with damaged panes.
Begin by carefully removing glass with gloves and safety glasses. You may have to make use of a utility knife in order to remove any remaining putty or glazing compound around the edges of the frame. Then, use a soft cloth or paper towel to clean the surface of both the glass and the wood of the frame.
After cleaning the area, apply silicone caulking that is waterproof to the frame's perimeter. This helps prevent water from getting in through the crack, which can cause further damage to both the frame and the glass.
If you have double-pane glass cracks that are severe could damage the gas layer that lies between the panes, making your windows less efficient in insulating. If the crack is significant enough to compromise the integrity of the glass or in the case of an inner pane that's completely missing, it might be time to contact an expert.
Cracks in the glass caused by thermal stress may occur when there is a significant temperature difference inside and outside your home. This causes the glass to expand and shrink. If the cracks are on two sides of a window it is recommended to replace it rather than try to repair it.
Clear tape can be used to fill cracks in windows that are not yet ready for replacement. It will also keep out cold and bugs. You can cut an area of nylon stocking or tarp that's sufficient to cover the crack, and fix it with duct tape. This isn't a long-term solution however it's a great solution in a pinch and keeps insects and cold air out of your home. If your windows are old and you're beginning to see cracks in the glass It's an excellent idea to talk with your local window company to determine if replacing the entire window would be a better option for you.
Rotten Wood
Wood rot is among the most frequent problems that plague windows. It can ruin a house's appearance and pose a safety risk. However, it is possible to repair wood that has rot. company website will first need to identify the cause of the wood decay. Look for leaks on the roof and other areas that water may get into the wood.
You will then need to take off the rotten parts of the window frame. This can be done with the use of a chisel, rasp or claw hammer. After the areas that are rotten have been eliminated then you must replace them with new wood. It is recommended to choose treated wood for this task as it will be resistant to rot. If you cannot replace the rotted timber then you can use wood hardener and filler to reinforce the damaged area. This kind of product will be available at most hardware stores. To achieve the best results, make sure you follow the directions on the label.
After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. Apply a water-resistant sealant the wood. A product like Sikkens is a good choice for this job.
You can also use an epoxy filler with two parts to shield the wood from further damage. This product is easy to apply and leaves a nice finish. However, it is important to follow the directions for application on the label. When the epoxy filler is dry it is possible to sand the wood's surface. Start with a rough sandpaper then move to a smoother grade.
The most important thing you don't would like to do is make the area that is rotting even more by exposing it to more water. It is a good idea therefore, to cover the surface repaired with an oil-based primer which will shield it from water. Then, you can reapply the waterproof wood sealant.
It won't open
There are a variety of reasons windows won't open. Wood frames can warp during rainy weather, or the house could have settled or someone may have nailed it shut to protect themselves. However, with a bit of patience and the right tools, all windows that are locked can be opened.
One of the most common causes of windows that isn't able to open is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks and locks. Metal hardware may also rust if it comes into contact humidity and direct sunlight. Spray grease on these areas will aid in preventing oxidation and ensure that your windows are operating properly.
Stuck windows can be the result of the breaking or loosening of the pulleys that are used to raise and lower the window. These components can lose tension and become obstructed if they are located at least two floors higher than the surface.
If you have trouble opening a door, you can use a pry-bar to gently open the door. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Alternately, you can run a hair dryer across the edges of the frame for a few minutes to warm the wood and allow it move more easily.
Another issue for windows that aren't opening is a faulty spring that prevents the window jamb from lowering or rising. You will need to consult the owner's manual for additional details based on the manufacturer of your windows.
If you've tried cleaning and lubricating the moving parts on your windows, but they won’t open, then it's time to replace them. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let the windows of your home go from functional to unusable. A window that isn’t properly shut could make your home vulnerable to water damage and burglary. Contact us today to learn more about our replacement windows and services!