15 Reasons To Not Be Ignoring Double Glazed Window Repair

Double Glazed Window Repair
Double glazing is an excellent energy efficient investment that reduces heat loss in the winter months and helps keep your home cooler in the summer. Repairing your double-glazed windows when needed is a great way to keep them in good working order.
Over time your double glazed windows may experience issues such as condensation and misting. This can cause your double-glazed windows to be difficult to open or close.
Broken Panes
A rogue baseball, a flying pebble from your lawnmowers or even a storm that is heavy can break the double panes of your windows and expose your home to the elements. While a cracked window can be difficult to fix, you don't have to have it replaced entirely. The insulated glass between two panes of glass is in good condition and you can fix your double-paned windows yourself.
First, you'll need to remove any broken glass from the frame. You'll need to be cautious to keep glass shards from falling to the floor or falling off the frame. Use a pair of work gloves to shield your hands from injury and a rag to cover the area around the broken glass to prevent further cuts or breakage. After removing the broken glass, clean the frame of the window thoroughly to get rid of any sealant or other debris. Sand rough areas of the frame to create a smooth and even surface to put in your new glass.
Once the frame is cleaned then you can apply a fresh layer of glass to the area where the damaged pane was removed. This is the best way to keep your window sealed and protected and save you money by preventing drafts and water from entering your home. The next step is to select the glazing material. There are several options, including clear tape that is more durable than regular tape and prevents further cracking of your window, or glazing film, which is similar to clear plastic wrap. The benefit of this option is that it can be painted over to match the frame you have, and it will keep snow and rain out as well.
Whatever material you decide to use it is important to press the glazier's points into that gap where the putty meets your frame. These will hold the new glass in place and help it adhere to the frame. Hardware stores carry glazier's point ropes that you can roll out onto the frame rabbets.
Condensation
If you are experiencing issues with condensation, it is best to call the window manufacturer. A lot of windows come with warranties and guarantees that cover these issues. Condensation or fogging between the windows' panes is a sign that your seals are damaged. Only an expert can fix this issue by replacing the panes.
It's a difficult procedure that requires special tools to remove and replace the old window. A professional can do this task and supply the equipment. Making use of these tools can be dangerous, however, so it is always recommended to leave this kind of work to a professional.
If you decide to do it yourself, ensure you wear safety glasses and gloves to protect yourself from any broken glass pieces that may fly off during the process. It is crucial to take out all metal or putty points from the grooves that will be receiving the new window. You will also want to brush the frame with wire and vacuum or wipe with a damp cloth. When the frame is dry and clean then you'll need order a piece of replacement glass which is 1/8 inch less in each direction than the window that you have and then fit it into the grooves.
Based on window repairs have depending on your frames, you'll need to apply the caulk to the grooves to ensure that the new pane is secure in position. After the silicone caulk is dried you can smooth it out and make any adjustments. Then the wood molding can be put back in place.
If the weather abruptly changes, double-glazed windows may be difficult to open and close. Extreme temperatures may cause the frames of double-glazed windows to expand or contract, which causes them to sag and stick. Try wiping the frames with water and then lubricating them in the event that this happens however it is better to seek advice from the company who installed your windows.
Misunderstood
If moisture is trapped between the glass panes, it can cause misted double glazing. Double glazing is comprised of two panes, which are separated by a space filled with argon for greater thermal efficiency. This creates a airtight seal that keeps warm air inside, and cold outdoor air out.
The seal may be damaged over time, and moisture may build up between the panes of glass, causing them misty. This happens because the sun's heat causes the gap between the window panes, causing water to vapourize.
It is a natural phenomenon however if it occurs between the windows' panes it could be a problem since it will no longer be able control the temperature in the room. Instead the temperature outside the window will influence the temperature inside. If you notice that your double-glazed windows have become blurred, call the experts at Northfield Glass to investigate.
We can repair the individual blow-sealed unit without having to replace the entire window and is less disruptive than a complete replacement. Our misty window repair involves removing the glass unit, cleaning it, then replacing it with a new one to make an airtight seal.
Some companies in the industry claim that they can inject chemicals through holes drilled into windows with mist to remove the fog and condensation. We don't recommend this method. This is not just ugly, but it can also damage the toughened glass and leave you with windows that don't fully perform its function.
If you don't fix the issue immediately, it could lead to mould, which could not only harm the window, but also risk health issues for your family members. Moisture can cause other problems in your home, including dampness or rot. In certain situations, it may be necessary to replace the entire window.
Failed or blown
Double-glazed windows are made up of two glass panes with an inert or air between them. This increases their thermal efficiency by keeping heat in and cold out. Over time, the gas can become depressurised and cause various problems.
One of the most frequently encountered is condensation that forms between the panes. Although it's a normal event, it doesn't necessarily mean that your window is damaged, it can be a sign that you need to seal your windows. Condensation can also be an indication of broken double glazing, which could require re-installation.
Double-glazed windows may also cause drafts. This could be due to a failed seal, a broken handle, or a broken lock. A draught can be obvious and result in higher heating costs Therefore, it is essential to get it fixed sooner rather than later. Test the seals on the window frame by feeling the cold air.
Another indication that the seals on your windows have failed is when you start to notice water beading on the inside of your windows. This is a sign that you need to re-seal your double glazed windows.
The window frames you have purchased were designed to move slightly and this is essential to keep the glass sheets in position. However, with time, this special packaging material may become compacted and this will crack the crucial seal. This will allow air to flow between the panes and reduce the efficiency of your window.
Double glazing that has ruptured a seal is an indication of failure and needs to be repaired as soon as is possible. A blown seal will prevent your double glazing from performing its primary purpose of keeping the cold out and warm inside. A damaged seal could let moisture in your home, which can cause mold and other unpleasant conditions. It is recommended to contact a double glazing repair expert when you discover a blowing seal on your double-glazed windows, since they could replace the whole unit.