15 UpAndComing Automotive Key Repair Bloggers You Need To Keep An Eye On

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition
We've all had this experience the car keys won't engage in the ignition. It happens at the most inconvenient times, like when you're filling your trunk with groceries, or returning to home from work.
There are many different solutions to bring you back on the way. Here are some of the most common key issues in the automotive industry and their solutions:
Broken or bent key
A bent key is the most frequent reason why car owners are unable to start their vehicle. Straightening the key is an easy fix. It may appear simple but be careful. The key is very thin and bending it just a little can cause it to break.
You'll need a sturdy work surface and a pair of pliers to accomplish this. Take the key at the other end using the pliers, then bend it until it is straight. It is recommended to do this on the floor or in a vice. Then, you can put it inside the lock to see if it changes.
If not, it might be time to get a new key cut. This will avoid having to call a locksmith and can ensure that your key will function.
Keep an extra key in your pocket so you're not without a way to enter your vehicle in the event that your key breaks.
If you are experiencing issues with a bent or broken key, try putting some grease on it prior to inserting it into the lock. This will enable it move through the cylinder and stop it from getting stuck. You can use graphite as a spray lubricant. Make use of the plastic tube which comes with the spray to ensure the most precise application. This will also help keep moisture from damaging your key.
Stuck pins or springs
Sometimes a pin (also known as a roll pin) or spring could become stuck. A pin is a small 2-3 in (5.1-7.6 cm) long piece of steel with hollow ends used to connect 2 parts of a machine. In most cases you can take a nut off by pulling it off using your fingers or using a wrench.
If you have an older vehicle that has microchip keys, it is possible that the key will need to be programmed in order to work with your car. This procedure can differ based on the manufacturer and car.
If you need help with your car keys or locks, give us call! We can repair or replace any vehicle key.
Gear Selector
It's important to get your vehicle to a mechanic as quickly as you can when the gear selector is stuck in park. It's a safety issue, and you could cause serious damage to your vehicle if continue to drive it. This could be a sign that your transmission system is experiencing bigger problems that are expensive to fix.
Luckily, most of the time, this issue is easily fixable. The most frequent reason the gear selector can be stuck is because one of the cable ends has snapped, or become uncoupled from the lever itself. The mechanic can fix this issue in a matter of minutes.
In some instances the gear selector bushing can get damaged or worn out. Rubber covers are placed around the points of articulation of the gear system in order to ensure that it is fluid. These rubber covers function similarly to the cartilage that you have in your joints, so they require to be healthy and flexible.
You can extend the life of your gear selector by doing a few simple things. First, you should stay clear of using the gear selector in extremely cold weather. This is because the cables controlling the gear tend to freeze and cracking. It is recommended to replace the bushings with premium quality ones, such as the ones from First Line.
These bushings form an essential part of your selection of gears and shouldn't be ignored. If image source notice yours is worn out, you should visit an auto repair shop that is specialized in Land Rover repairs. They can assist you to locate the ideal parts to restore the gear selector mechanism. They can also provide you with many other services, such as transmission service and maintenance.
Dead battery
If you turn on your key in the ignition and hear nothing but a click, then your battery is dead. The majority of batteries last between three and five years, and as they get older, they undergo a natural process that causes them to die early. The negative plates of your car battery will begin to be coated with sulfate crystal deposits.
A dead battery can also cause you to lose the electrical power in your vehicle which can cause the radio or electric windows to malfunction. If your car has been experiencing problems getting started in cold weather, it is an indication that it's time to get an upgrade to your battery.
Sometimes, the issue may not be due to a dead battery, but rather a malfunction within the charging system of your vehicle. This issue can be fixed by having your mechanic verify that the alternator, serpentine belt, and battery cables are working correctly.
Another type of key repair for automotive vehicles is an ignition key that has stopped working properly. The key fob is connected to the computer in your car and relays signals and commands between the engine and accessory systems. This system may be confused or cease communicating if it gets wet or is exposed to extreme temperatures.
You can usually reset the lost key fob by following the steps in your owner's manual. Depending on the model of your car you may have to open and close the doors, switch lights and other electronic devices on and off, press a certain sequence of buttons, or open and shut the windows. If this doesn't solve your device, it could require professional programming, which will require the services of a technician. Try image source before purchasing the new fob.
Ignition socket
Modern car keys are fitted with a transponder that when inserted into ignition, sends out the signal. This signal tells the immobilizer in the car whether the key is the correct one for it to start. In the 1990s, car theft was a major problem. Most manufacturers installed this transponder system for safety and insurance reasons.
If you own a brand new vehicle, the only option to replace your keys is at the dealership or directly with the manufacturer. Before you go there make a note of the VIN number of your vehicle (vehicle identification number). This can be found on the front of the dashboard, door jamb, or in the owner's manual.
Bring your current key with you to an participating AutoZone store, and an associate will utilize a machine to trace the contours of your key blank to accurately duplicate the original key. They will then cut the new key using an exact cutting machine on site. If your key is equipped with blade, fob or a thick head that is grey or black it must be programmed to your car before you can use it to start the motor.