10 Misconceptions Your Boss Holds Concerning Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs
Has your uPVC window or door mechanism deteriorated? Perhaps the handles on your uPVC windows or doors aren't aligned correctly or are difficult to use.
It is crucial that your double-glazed doors operate smoothly, otherwise you will lose energy and increase the chances of burglary. Owen the Locksmith will be able to fix your door lock at an affordable price.
Snapped Key
When a key snaps off inside the lock, it can be extremely annoying. It also poses an issue for security, since the door may not lock and leave you vulnerable to burglars. There are a few quick solutions you can use to fix the problem and get your door working again.
The first step is to remain calm. If you panic and begin playing around with your keys you could end up pushing the damaged piece of the key further into the lock, thereby making the situation worse.
Then spray WD-40 or a different penetrating oil into the lock to help the broken piece slide out more easily. You can also use the screwdriver to break up any pieces stuck. If you're fortunate enough to have a little bit of the key that is hanging out it, you can make use of a paperclip or other metal object that is thin to grab it and remove it. Both methods work, but be careful not to push the damaged key piece further into the keyway.
Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't happen to have any of these then you can bend a hook with needle-nosed pliers. You can also use a pair tweezers to grasp and pull out the last bit of the broken keys.
If you cannot remove the broken key piece then you can use a lock deicer. It is available at all hardware stores, and it is used to freeze any water or ice that could be inside the lock.
If double glazing window repairs of these solutions seem to work, it might be time to contact a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door locks and mechanisms such as snapped keys and broken handles. They can also reconfigure the double glazing door mechanisms to ensure that they are more easy to operate. You can book an appointment online for a double-glazing repair or contact us to discuss your needs.
Broken Cylinder
A broken cylinder is an immediate security risk. A professional locksmith can easily repair the cylinder. A locksmith will have to tap the cylinder in order to repair it. This can be accomplished with a hammer, or any other tool. However, the most effective method is to use a wire or a long match. Then, place the match's tip or wire near the keyway. The locksmith can then strike the lock to break it. This is much better than using a heavy hammer that could harm the lock.
Overheating is the most common reason for cylinder heads to crack. This can occur when the cylinder block and cylinder head are made from different metals, including cast iron and aluminum. When the various metals are heated and cool at different rates, it could cause localised hotspots that expand faster than the rest of the cylinder head, leading to cracks.
Another possible cause for cracks in cylinders is corrosion. If the head and block of the cylinder are not maintained correctly, they can corrosion or rust and cause them to expand more than they would normally. This can cause cracks as time passes.
If your uPVC window lock or door is brittle or requires an enormous amount of pressure to turn, this can be caused by many things. A malfunctioning locking mechanism, misalignment or an old handle are the most common causes of this issue.
This is a simple and cost-effective fix that a majority of double glazing owners can accomplish. A professional locksmith will usually be able solve this problem within an hour after arriving at your residence. Depending on your needs, they can replace the locking mechanism, replace the window handles, and change the gearboxes. A professional locksmith will always be able advise you on the most cost-effective options for your home. They can even suggest upgrades to high-security 3 Star euro cylinders TS007 that provide an extra layer of security against burglars. It's a small amount to get the peace of mind that comes from knowing that your uPVC door is secured.
Broken Handle
Window handle locks have complex mechanisms that wear out as time passes and use, so it's not a surprise that they sometimes break. If yours fails, it can be difficult to pinpoint the cause of the issue and make sure you fix it properly.
If the issue is with the internal locking mechanism or the latch, repairing your broken handle can improve your uPVC double glazing door's security and help you stop drafts. It is costly to repair or replace your handle incorrectly and it could also harm the frame and lock of your door.
Screwdriver: With the window open remove the screw that holds the handle. The screw should be on the inside of the back plate, and is normally covered by an aesthetically pleasing cover for the screw reasons. Be sure not to lose any internal parts within the handle, such as the levers or plates on either side of the spindle. Ideally, keep them in the same order so you can re-install them when needed.
Then, with a second screwdriver loosen the screw that connects the handle to the spindle at the back. Once the screw is released, you'll be in a position to pull the handle away and pull off the damaged spindle. Replace it with a brand new spindle, ensuring that it's the same length (you can find them online or at hardware stores). Securely screw it into the correct position. Do not tighten the screw too much because this could harm the handle as well as the window frame.
Make sure the new handle is fitted Close the window and test the handle. It is likely that it will operate smoothly and you'll be able open your window once more.
While you're working on the handle, don't forget to check your uPVC windows are closing properly. If they don't, you could experience damp and draughts inside your home, as and also affecting the efficiency of your home's energy usage. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames so they can shut properly.
Broken Spindle
It is usually the case that the spindle in the handle breaks, rather than the handle itself. This is most frequent in uPVC tilt and turn windows. These windows require a handle that operates a locking device in the window frame. The handle is attached to a rod in the centre that triggers a set of cams that look like mushrooms, they lock into window frame keeps. If the dead latch mechanism fails to open when the handle is turned, it is possible that the spindle is broken and this could be an extremely frustrating issue.
There are ways to fix this problem. A reputable locksmith can swiftly and efficiently solve the issue. A good locksmith will be able disassemble the handle of the window by using a tool to remove the wheel from the area that houses the spindle. This can be done without damage to the handle or window frame.
After removing the wheel the technician can inspect the spindle and determine the cause of the break. This involves breaking down the spindle into its individual parts and carefully recording their general condition, as well as any specific areas of wear or damage. This procedure is usually carried out in a clean environment by skilled technicians.
The next step is to clean the damaged spindle, this assists in removing any debris or dirt that might be obstructing its normal functioning. After this the spindle is cleaned, it could be repaired or replaced. If it's being replaced, the technician can take an identical dowel size to the one used in the first and drill mating holes into both pieces of the spindle. This ensures that the new spindle is an exact fit with the handle.
If the spindle is damaged and cannot be repaired, it could need to be replaced entirely. Home centers can sell generic replacements but if the window design is unusual, you will need to contact an expert in woodworking or cabinet making who can make the exact part. Once the new spindle has been installed it can be positioned to the handle by line up the screw holes in the handle and the frame existing screws. Once the new handle is firmly installed, you are now ready to operate your uPVC window.