10 Misconceptions Your Boss Shares Concerning Double Glazed Window Repair

Double Glazed Window Repair
Double glazing is an excellent energy efficient investment that stops heat loss in the winter and keeps your home cool in the summer. Double glazing windows repaired as needed is a great way to ensure that they function properly.
Over time, your double glazed windows can suffer from problems like condensation and misting. This can cause your double-glazed windows to be difficult to open or close.
Broken Panes
A ball that is rogue or a stone flying from your lawnmowers or a strong storm can shatter the double pane windows of your home which can expose your home to the elements. While a damaged window may be difficult to fix, you don't have to replace it entirely. In fact, the insulated glass between the two panes is still in good shape and you can repair your double-pane windows with a little DIY effort.
First, you'll need to remove any broken glass from the frame. You'll need to be cautious to keep glass shards from falling to the floor or falling out of the frame. Use a pair of work gloves to shield your hands from injury and a rag to cover the area around the broken glass to prevent further breakage or cuts. After removing the broken piece and cleaning the entire frame of the window to get rid of any remaining sealant and debris. It's important to sand rough areas of your frame to ensure an even surface for your new glazing.
After cleaning the frame after cleaning, you can apply a second layer of glass on the seam where you removed the broken pane. This is the best way to ensure that your window is secure and sealed and help you save energy costs by keeping water and drafts from entering your home. The next step is to choose the right glazing material. There are a variety of options, including clear tape that is more durable than regular tape and can keep your window from further cracking, as well as glazing film that is similar to clear plastic wrap. The benefit of this type of material is that it can be painted to match your frame and will keep snow and rain out too.
Whatever the material you pick regardless of the material you choose, it is essential to press glazier's facets into the place where the putty joins the frame. They will help hold the new glass in place and assist it stick to the frame. The glazier's point can be found in hardware stores, and are available in pre-made ropes which you roll over the frame rabbets.
Condensation
If you're experiencing problems with condensation, it's best to call your window manufacturer. A lot of windows come with warranties and guarantees that cover the issues. Condensation and fogging in the panes of glass is an obvious indication that the seals between your windows are broken and can only be repaired by a professional who will fix both panes.
This procedure is a bit tricky and requires the use of special tools to remove the old pane and then install the new one, but it can be accomplished by an expert who will supply the necessary equipment. Utilizing these tools could be dangerous, so it is always recommended to leave this kind task to professionals.
Wear safety gloves and glasses if opt to do it yourself. You may be exposed to flying glass fragments. It is also important to remove all putty and metal glazing points from the grooves in which the new window will go. You will also want to brush the frame with wire and vacuum or wipe it with a damp cloth. When the frame is clean and dry then you'll need purchase a replacement glass that is 1/8 inch shorter in each direction than the window, and then test it into the grooves.
Based on the frames you have You will then have to apply the caulk on the grooves to ensure that the new pane is securely in the right place. Once the silicone caulk has dried you can smooth it out and make any adjustments. The wood molding can be reinstalled.
If the weather abruptly changes, double-glazed windows may become difficult to open or close. Extreme temperatures may cause the frames of double-glazed windows to expand or contract, causing them to sag and stick. If this is the case, you can try wiping the frames down using water and lubricating joints. However, it might be a good idea to call the company who installed your windows for help.
Misunderstood
Misted Double Glazing is a window issue that occurs when moisture gets trapped between the glass panes of double glazed windows. Double glazing consists of two panes, which are separated by a gap filled with argon for greater thermal efficiency. This creates an airtight seal that keeps warm room air inside and cold outdoor air outside which allows you to keep your temperature in your home comfortable.
As time passes, the seal can break down and moisture will start to build up between the window panes, causing them to become misty. This happens because the sun heats the gap between window panes, causing water to vapourize.
This is a normal thing to happen, but when it occurs between the window panes it can be a problem since it can no longer regulate the temperature of the room, and allows the outside temperature to influence the indoor temperature. Northfield Glass can help you if your double-glazed windows start to mist.
We can repair the individual sealed blown unit without having to replace the entire window and is less disruptive than a total replacement. Our misty [1] window repair involves removing the glass unit, washing it, and then replacing it with a fresh one to create an watertight seal.
Some companies in the industry claim to inject chemicals through holes into misted windows to remove the fog and condensation. We do not suggest this method. This is not only unattractive, but could also damage the toughened glass leaving you with a window which doesn't function properly.
If you don't address the issue immediately it could cause mould, which can not only cause damage to the window, but could also risk health issues for your loved ones. Moisture can cause other issues within your home, including dampness or rot. In certain cases, the window may need to be replaced entirely.
Blown or Failed
Modern double-glazed windows come with two glass panes with an inert gas or air in between them. This increases their thermal efficiency, allowing warm air in and cold air out. Over time, the gas can become depressurised and cause a variety of issues.
One of the most frequently encountered is condensation that forms between the panes. It's not a sign of a window failure however it could indicate that you should replace the panes. Condensation can also be a sign of a broken double glazing, which could require re-installation.
Double-glazed windows can also create draughts. This could be because of a failed seal or handle that is broken, or a broken lock. A draught can be evident and can result in higher heating bills Therefore, it is essential that you get this fixed sooner rather than later. Test the seals on the window frame by feeling for cold air.
Another sign that your window seals have failed is when you start to notice water beads on the inside of your windows. This is an indication that you need to reseal the double glazed windows.
The window frames you have purchased were designed to move a bit, which is necessary to keep the glass sheets in place. However, over time, this special packaging material can become compacted and this will break the all-important seal. This will allow the air to move between the panes, reducing your window's energy efficiency.
A damaged seal is a clear sign that your double glazing is damaged and needs to be fixed immediately. A blown seal will prevent your double glazing from performing its primary job of keeping cold out and warm inside. Furthermore, a blow-off seal can let moisture in, which can result in mold and other unpleasant conditions. It is recommended to contact a specialist in double glazing repair immediately if you discover a blowing seal in your double-glazed windows, as they can replace the whole unit.