11 Faux Pas That Are Actually OK To Make With Your Window Repair

Window Repairs
Window repairs can help homeowners save money and make their homes comfortable. Window replacement is often required in the event of serious damage such as broken glass, or a shattered window frame.
Other issues can be fixed to extend the lifespan of windows. The most frequent issues are:
Cracked or broken Panes
If it's an unintentional rock thrown by your lawnmower or a tree's branch blown by high winds, damaged window glass is not only unattractive but can lead to higher electric bills since the broken pieces allow cold air into your home. It's relatively easy to repair windows that have broken panes.
Begin by carefully removing glass using gloves and sunglasses. You may have to make use of a utility knife in order to loosen any remaining putty or glazing compound around the edges of the frame. Then, use a gentle cloth or paper towel to clean the surface of the glass and the frame's wood.
Once the frame is clean and dry, apply a waterproof silicone caulking to the perimeter of the frame. This will stop water from getting into the frame through the crack and cause further damage.
A crack that is severe in double-paned glass can cause gas to leak between the panes, rendering your windows less efficient in insulating. If the crack is severe enough to cause damage to the integrity of the glass or in the case of an inner pane completely missing, it's time to call in a professional.
repair double glazed windows in the glass caused by thermal stress may occur when there's a drastic difference in temperature between your home and the outside. This causes the glass to expand and contract. If this happens across two portions of a window it's best to simply replace the pane rather than trying to repair it.
For windows that have cracked but aren't yet ready to be replaced Clear tape can do a good job of securing the crack and keeping out bugs and cold air. You can cut a nylon stocking large enough to completely cover the crack and then glue it to the surface with duct tape. It's not a permanent solution, but it's a good way to keep insects out and cold air away from your home. If your windows are older and you're starting to notice cracks in the glass, it's an excellent idea to talk with your local window company about whether replacing the entire window could be a better alternative for you.
Rotten Wood
Wood rot is a frequent problem for windows. It can ruin a house's appearance and pose a safety danger. However, it is possible to fix rotted wood. First, you will need to ensure that the source of the rot has been addressed. Check for roof leaks and other areas that water may get into the wood.
The next step is to remove any rotten areas of the window frame. This can be done using a claw hammer, chisel or a rasp. After the rotten areas have been removed then you must replace them with new wood. Pre-treated wood is suggested for this project, as it will resist decay. If you cannot replace the rotted timber then you can use wood hardener and filler to repair the damaged area. Most hardware stores will have this type of product. To achieve the best results, adhere to the instructions on the product label.
After window repairs near me have repaired the damaged areas of the window sill, it's crucial to protect the area. Apply a water-resistant sealant to the wood. A product like Sikkens is an excellent option to accomplish this task.
Use a two-part epoxy in order to protect the wood against further damage. This product is easy to apply and gives an excellent finish. However, it's important that you follow the application instructions on the label. After the epoxy filler dries you can sand the surface of the wooden. It is recommended to begin with a rough layer of sandpaper, and then progress to a smoother grade.
You do not want to expose the damaged part to further moisture. It is therefore an ideal idea to cover the area that has been repaired with an oil-based primer that will shield it from moisture. After that, you can apply waterproof wood sealant.
It won't open
A window that won't open can be caused by many factors. The house might have shifted or the wooden frames may have warped in wet weather. Someone might have also put them in place to protect themselves. With a bit of patience and the right tools, you can open most stuck windows.
Accumulated debris or gunk can be a major cause of the window not opening. Dirt and grime build up on the sliding tracks, hinges and locks over time, according to Acme Glass. In addition, metal hardware may get rusty when in contact with humidity and direct sunlight. Spray grease on these areas can aid in preventing oxidation and help keep your windows operating properly.
Stuck windows could be caused by an unintentional break or loosening of the pulleys that are used to lift and lower the window. These components can lose tension and cause obstruction when they are placed higher than two floors above the ground.
If you have trouble opening a door, you can use a pry-bar to gently open the door. Place a wood block on the frame to give your pry bar more leverage and be sure not to harm the window or wood. You can also try running a hair dryer along the edges of the frame for several minutes to warm the wood and assist it to move more easily.
A faulty spring can also be the cause of windows that don't raise or lower. You will need to consult the owner's manual for more details depending on the person who made your windows.
If you've tried cleaning and lubricating the moving components on your windows, but they won’t open, then it may be time to replace them. Homespire Windows & Doors offers windows that are energy efficient. Don't let windows in your home go from functional to inoperable. A window that isn’t properly shut could expose your home to burglary and water damages. Contact us today for more information about our replacement windows and services!