14 Questions You Shouldnt Be Afraid To Ask About Double Glazed Window Repair

Double Glazed Window Repair
Double glazing is an energy efficient investment that reduces heat loss in the winter and keeps your home cooler during the summer. Restoring your double-glazed windows as required is a great method to ensure they remain in good working order.
Over time condensation and misting may affect your double-glazed windows. This can cause your double-glazed windows to be difficult to open or shut.
Broken Panes
A stray ball or a stray pebble from your lawnmowers or even a heavy storm can break the double panes of your windows, leaving your home exposed to the elements. Even though a glass window that has been damaged is difficult to repair but it doesn't have to be replaced. In fact the insulated glass between the two panes is in good shape and you can repair your double-pane window using a little DIY effort.
To start, you'll need to remove the broken glass from the frame. You'll need to be cautious to keep glass shards from falling onto the floor or sliding out of the frame. Use work gloves to protect you hands, and a rag around the broken glass area to prevent further cuts or damage. After removing the broken glass, clean the frame of the window thoroughly, removing any sealant or other debris. It's important to sand rough areas of your frame to ensure a smooth surface for the new glazing.
After cleaning the frame, you can apply a fresh layer of glass to the area where the broken pane was removed. This is the best method to protect and seal your window. window repairs near me will also reduce your energy bills by preventing water and drafts from entering your home. Next, you will need to choose your glazing material. There are several options available, including clear tape that is more durable than regular tape and will help keep your window secure from further cracking, and glazing film that resembles clear plastic wrap. The benefit of this option is that it can be painted over to match the frame you have and will also keep out rain and snow too.
Whatever material you choose, it is important to press glazier's facets into the place where the putty joins the frame. They will help hold the new glass in place and assist it to adhere to the frame. Glazier's points can be found in hardware stores, and they are available in pre-made ropes which you roll onto the frame rabbets.
Condensation
Double glazing is susceptible to condensation issues. If you encounter this issue, it is best to call the company that installed the window. There are warranties and guarantees to cover these issues. Fogging or condensation on the windows' panes is a sign that the seals aren't working properly. Only a professional can resolve this issue by replacing the panes.
This process is a little tricky and requires special tools to take off the old one and replace the new one, however it is possible to do this by an expert who will provide the required equipment. Making use of these tools can be dangerous, so it is always recommended to leave this kind of job to an expert.
Wear safety gloves and glasses if you choose to do it yourself. You could be exposed to glass fragments flying around. It is also important to carefully remove all putty and metal glazing points from the grooves in which the new window will be. Wire-brushing the frame, vacuuming or wiping with a damp cloth are also recommended. Once the frame has dried it is time to order an additional piece of glass that is 1/8" shorter in both directions than the existing window. Make sure the glass fits into the grooves.
Based on the frame you have depending on your frames, you'll need to apply the caulk on the grooves to ensure that your new pane is securely in the right place. Once the silicone caulk has dried, you can smooth it out and make any adjustments. Then the wood molding can be reinstalled.
Double-glazed windows may become difficult to open or close if the weather changes dramatically. Extreme temperatures can cause frames to expand or shrink and cause them to fall or stick. You can try wiping down the frames with water and then lubricating them if this is the case however, it's better to seek help from the company that installed your windows.
Misunderstood
Misted Double Glazing is a window issue that occurs when moisture gets trapped between the glass panes of your double glazed windows. Double glazing is comprised of two panes of glass that are separated by an insulating area, typically filled with argon gas to provide better thermal efficiency. This creates an airtight sealing that keeps warm indoor air inside, and cold outside air out.
Over time however, this seal will begin to break down and moisture will start to build up between the window panes, which causes them to become misty. This happens because the gap between the panes is heated by sun, which causes water vapour to form within it.
This is a normal occurrence but if it happens between the window panes it can be a problem since it will no longer be able to control the temperature in the room, and allows the outside temperature to affect the indoor temperature. Northfield Glass can help you if your double-glazed windows start to mist.
We can replace a single blow sealed unit, without the need to replace the entire window. This is less disruptive than a full replacement. Our misty glass repair involves taking off and cleaning the glass unit before replacing it with a new one. This will create a watertight seal again.
There are companies within the field that claim to cut holes into your windows with mist and inject chemicals into them, which they say removes the fog & condensation, however, we do not recommend this procedure. This is not just ugly, but it can cause damage to the toughened glass and can result in windows that don't fully perform its function.
It is important to fix the issue as quickly as you can, as if untreated, it can lead to mould growth which can not only damage the window but also poses health risks for your family members. Moisture can also cause other issues within your home, like dampness or rot. In some cases it is possible to replace the entire window.
Blown or failed
Double-glazed windows are comprised of two glass panes with an inert or air between them. This increases their thermal efficiency by keeping heat in and cold out. As time passes, the gas can become depressurised and cause many issues.
Condensation in between the panes is among the most frequent. It is not a sign of a window failure, but it could indicate that you should replace them. Condensation may also be a sign that your double glazing has broken, in which case it will need to be replaced completely.
Double-glazed windows can also create draughts. This could be caused by an issue with the seal or a damaged handle lock. It is important to fix this issue as soon as possible. A draft will force you to pay more for heating. You can test the seals by placing your finger around the edges of the window frame to see whether you feel cold air.
You will also notice water beads on the interior of windows if the window seals aren't performing as they should. This is an indication that you have to replace the seals on your double-glazed windows.
Your window frames are designed to move a bit as they have to do to keep the glass sheets in place. However, with time, this special packaging material can be compressed and crack the crucial seal. This will allow air to circulate between the panes, which will reduce the energy efficiency of your window.
Double glazing that has ruptured a seal is an indication of a failure and needs to be repaired as soon as possible. A blown seal stops your double glazing from fulfilling its primary function, which is to keep the cold out and warm air in. Additionally, a blown seal will let your home's moisture in, which could result in mold and other unpleasant conditions. It is important to contact a double glazing repair specialist when you notice a blown seal in your double-glazed windows, as they are able to replace the entire unit.