15 Things That Your Boss Wished You Knew About Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't corrosion or rot.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also increase energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good repair.
For single pane windows, it can be relatively simple to replace them, and the new window will usually fit inside the frame of the previous one easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this case, you will need to locate some plastic spacers to assist the new pane to fit perfectly into the frame of the window.
Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled under.
After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you might think about a security door that has an integrated window, since it will provide the best of both worlds.
2. Sagging
uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a variety of issues such as sliding. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.
To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window to access the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you're happy with the fit, you can tighten the screws until they stay in position.
If you can't reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.
uPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can be due to the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. The first step is to close the window and perform an initial test fit. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.
3. Water Leaks
If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. Windows that leak water do can not only cause degradation of your home's structure but also hamper your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.
This is an easy fix that can be completed by any DIYer who is competent. Based on the severity of the problem the caulking that was used up may require removal before a fresh layer can be applied. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and reduce the efficiency of your energy.
It is important to check that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.
Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and is able to quickly spread throughout the house.
It is also important to remember that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and open in a breeze It could be hinges at fault. These are easily repaired by any skilled DIYer and can usually be done within a few minutes.
Like any mechanical part, hinges can be damaged over time. It is very easy to change a window hinge, but it's easier if someone helps hold the frame.
Verify that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrows on each hinge. This shows which way the window should be opened.
The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or by inadequate installation at the factory. This issue can be fixed by sending us a picture on our website. We will be happy to give you suggestions.
Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. upvc window repairs near me will make the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. The ideal time to do this once a year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by different things. The hinges, also because of wear and tear, can become misaligned, this causes an opening to appear between the sash and the frame. They can be repaired by giving them good cleaning, but if they are beyond repair it might be necessary to have them aligned or replaced. The interlock, which is located on the hinge of the window, can also be misaligned, and again it may be possible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.
The next most common reason for draughts is window seals. They can become worn down or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce draughts.
Another, and most effective ways to reduce drafts is to use a draught excluder, these are typically fabric tubes which are filled with a kind of filler. They can be put on the top of your windowsill. They can help block out cold air and keep your home warm and cozy!
With a bit of regular maintenance and repairs, your upvc windows will provide an excellent level of security and insulation for your home. It is important to remember that all windows eventually become worn out, and it is more cost-effective to replace them rather than repair them. If you have any problems with your Upvc window, it's best to consult a professional as soon as you can.