15 Tips Your Boss Wished Youd Known About Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum and timber.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home and even be fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good shape.
Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.
If you're planning to try to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.
It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your property until a professional comes out to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the distance between the window and the door is large, you might need to consider security screens that includes windows. This will give you the best of both.
2. Sagging
uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they can suffer from a variety of issues like sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.
To fix upvc window repair near me sagging window you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you're happy with the fit, you can tighten the screws to ensure they stay in position.
If you cannot reposition the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are watertight and safe from drafts.
uPVC handles may also loosen up. The majority of the time this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. The first step is to close the window and perform a test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.
3. Water Leaks
It is essential to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.
This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how serious the issue is, the old caulking may need to be removed. When it is time to uPVC repair, it is important to be careful not to over-caulk. This will only make your window harder to clean and reduce its energy efficiency.
Check that any drainage holes are free of debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.
Mold spots and rotten sills are also signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.
If the leakage occurs between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it blows open with an ease. Any competent DIYer can replace these in a matter of minutes.
Like all mechanical parts hinges are prone to wear out over time. It's easy to replace a hinge on a window, but it's easier if someone else helps you hold the frame.
Verify that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.
The issue could be caused by opening the window incorrectly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you advice.
It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.
5. Draughts
Draughts in windows made of upvc can be caused by a variety of various factors. Firstly the hinges, again because of wear and tear, could become misaligned. This causes a gap to form where the sash joins the frame. They can be fixed by giving them a good clean, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. The interlock may be disaligned. It is located on the hinge side and might require to be cleaned. In some cases it might be necessary to replace these.
These seals can wear down or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease draughts.
Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some sort of filler and can be put on the windowsill on top. They can help stop cold air from entering and keep your home warm and cosy!
With a bit of regular maintenance and repair windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is essential to remember that all windows eventually get worn out and it is more cost-effective to simply replace them than to repair them. If you are experiencing problems with your upvc windows, it is best to seek professional assistance as soon as possible.