5 Repairs To Upvc Windows Myths You Should Stay Clear Of

Repairs to uPVC Windows
uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't rust or rot.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
The broken glass in your windows could cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good repair.
For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need locate some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.
Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor and could be trampled under.
It's a great idea tape the gap once the glass is removed. This will stop water and drafts from entering your home until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the distance between the door and the window is substantial, you may want to use an alarm system that has windows. This will give you the best of both.
2. Sagging
uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they are susceptible to a range of problems including sagging. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are falling down.
Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll need to open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you are happy with the size of the window, tighten the screws to secure them in the right position.
If you aren't able to move the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.
UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and do a test fitting. The corners of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into the position it was in.
3. Water Leaks
If you wake up to wet floors and mouldy walls each time it rains it's crucial to take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.
This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking used previously may require removal before a fresh layer can be applied. When it comes to uPVC repair, you should avoid over-caulking. This will only make your window more difficult to clean and reduce its energy efficiency.
It is important to check that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.
Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.
If the leakage occurs between the double-glazed window, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. over at this website will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or loose and blow open with a breeze, it may be hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.
Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's easy to replace a hinge on a window however it is easier if someone helps you hold the frame.
Check that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.
Faulty window hinges can be caused by incorrectly opening the window in a certain way or by poor installation at the factory. This can often be resolved by sending us a photograph on our website. We will be pleased to offer you suggestions.
Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by different things. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause gaps to develop where the sash meets the frame. These can be easily repaired by giving them a good cleaning, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it may be possible to just give them a clean but in some instances it could be necessary to get them replaced.
The next most common reason for draughts are the window seals, these are prone to wear or damaged over time, and let air escape through these gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease draughts.
Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.
With a little maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert immediately.