Beware Of This Common Mistake With Your Automotive Key Repair

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition
We've all been there: the car key won't engage the ignition. It could happen at the worst possible time, such as when you're loading your trunk with groceries or returning home from work.
Rather than panic instead, there are a variety of options to get you back on the road. Here are some common automotive key problems and solutions:
Broken or bent key
A bent key is the most common reason a car owner can't start their vehicle. This can be easily repaired by simply straightening the key. It may sound simple, but it is important to do it with care. The key is extremely thin and could break if you bend it even a little.
You will need a stable work surface as well as a pair of pliers for this. Pick up one end of the key using the pliers and bend it back until it is straight. It is best to do this on the floor or in a vice. You can then place it inside the lock to see if it turns.
If not, it could be time to have a new key cut. This will save you from needing to call a locksmith and can ensure that your key works.
Keep an extra key in your pocket to ensure you don't have a way to enter your vehicle if yours breaks.
If you're having issues with a broken or bent key, you can try applying lubrication on it before inserting it into the lock. This will allow it move more easily through the cylinder and stop it from getting stuck. It is possible to use a spray graphite powder or lubricant. If you are using a spray, ensure that you attach the plastic tubing included with it for more precise application. This will also help stop moisture from ruining your key.
Pins that are snuck or springs
Sometimes a pin (also called a roll pin) or spring can get stuck. Pins are a tiny piece of metal that is between 5.1 and 7.6 cm (2.5-3.0 in) long, with hollow ends. It is used to connect two components of a machine. In the majority of cases, you can remove a nut by pulling it out using your fingers or the wrench.
If you own a newer vehicle that is equipped with an electronic key with a microchip in it, there is a chance the key needs to be programmed to work with your car. This process can vary depending on the car and manufacturer.
If you need assistance with your automotive keys or locks, give us a call! We can repair, replace or program virtually any car key.
Selector for gears
If your car's gear selector becomes stuck in park mode, you need to take it to a mechanic as soon as you notice it. It's a security issue, and you could cause serious damage to your vehicle if you continue to drive it. This could also be a sign that your transmission system is experiencing bigger issues, which can be costly to fix.
Luckily, most of the time this problem can be fixed easily. Most often, the cable end that is attached to the lever could snap or become disconnected. This is a simple fix, and the mechanic can usually make it within a few minutes.
In certain instances, the bushings of the gear selector might be damaged or worn. Rubber covers are placed around the joints of the gear system to ensure that it is fluid. These rubber covers function similarly to cartilage joints, so they need to be flexible and healthy.
You can extend their life by doing a few basic things. You should first avoid using the gear selection during extremely cold weather. This is because the cables controlling the gear are prone to freezing and cracking. You should also replace your bushings, for instance those made by First Line, with high-quality ones.
car key fob repair form an essential element of your gear selector and should not be overlooked. If you notice that yours is wearing out, it's a great idea to go to an auto shop that is specialized in Land Rover repairs. They will help you find the right parts to restore your gear selection apparatus. They can also offer various other services like transmission maintenance and service.
Dead battery
If you switch the key in the ignition and hear nothing but a click, then your battery is dead. As batteries age, they go through a natural process which causes them to die early. The negative plates of your car battery will begin to be covered with sulfate crystals.
A dead battery could cause the loss of electrical power within your vehicle which can cause the radio or electric windows to fail. If your car has been having issues starting in cold weather, this is a good sign that it is time for a new battery.
Sometimes, visit the following website page may not be a dead battery, but a problem with the charging system of your vehicle. This problem can be resolved by having your mechanic check that the alternator, serpentine belt and battery cables are working properly.
A key fob that's not working properly is another common problem for automotive key repair. The key fob connects to the computer in your vehicle and relays signals and commands between the engine and accessory systems. The system could become confused or stop communicating if it is submerged or is exposed to extreme temperatures.
It is usually possible to reset the lost key fob by following the directions in your owner's manual. Based on the vehicle you have, you may need to open and close the doors, turn lights and other electronic devices off and on, press a certain sequence of buttons, or shut and open the windows. If this does not fix the issue, your device may require professional programming that will require the assistance of an expert. However, it's still worthwhile to try these easy steps before deciding to pay for a new one.
Ignition socket
Modern car keys have a transponder chip built into them that sends a signal to a receiver in the ignition when it is inserted. This signal informs the immobilizer inside the car if it is the right one for it to start. In the 1990s theft of vehicles became such a problem that most manufacturers put this transponder security system in their vehicles for safety and insurance purposes.
If you have a newer car, the only way to replace your key could be at the dealership or by contacting the manufacturer directly. Before you go note down the VIN number of your vehicle (vehicle identification number). This number is usually found on the dashboard's front, door jamb, or in your owner's manual.
Bring your existing working key to an AutoZone participating store. An associate will use a machine that will trace the contours of the blank key in order to precisely duplicate the original key. The new key will be cut on-site by a cutting machine that is precise. If your key is equipped with blade, fob or a thick grey/black head it will need to be programmed for your car before you can use it to start the motor.