From Around The Web From The Web 20 Awesome Infographics About Keys Repair

Car Keys Repair - Common Problems With Car Keys
It can be difficult to keep the keys to your car. They can be damaged, bent or even stolen.
Check your pockets and bag for them. If they aren't there try jiggling the keys. This could help remove any small damage to the lock wafers in the cylinder.
1. The key is bent
The most frequent issue with keys for cars is that they can be bent. This is a possibility if you're using your key to open your trunk or to load groceries into it.
Generally, the best solution for this problem is to call a locksmith, since they have the tools and know-how to take out the bent key without damaging the lock or ignition. They can also create keys for you on the spot and is particularly helpful for those with a modern, chip-embedded car key.
The chip-embedded key has a special electronic transmitter built in. It sends an individual message to the vehicle's computer system, telling it whether the key is legal. This type of key can be manufactured by a locksmith or you can purchase an alternative from your dealer. It is usually simpler to replace an older key at a hardware store or locksmith in the event that you already have one.
It's a good idea to note down the VIN (VIN) of your key, so that you can give it to anyone who makes or repairs it. The VIN is typically located on the dashboard of your vehicle or in its owner's manual. If you decide to purchase a replacement key it is a good idea to have the dealer program it to your car. It could take several days and could cost upwards of $200.
2. The key is stuck
The car key might be stuck due to a variety of reasons. Some of these reasons might be unique to a particular car model or type, but many of them are universal. Here are a few of the most frequent ways your car key may become stuck in the ignition:
One of the most common reasons for a car key becoming stuck in the ignition is dirt and build-up. The more grit you put into the ignition, then the more friction will develop between the key surfaces. This could make it difficult to turn or remove the key.
Another possibility is that your key has been damaged. Over time your key will begin to wear down due to regular use. You may even drop the key on an un-hard surface, breaking it or breaking it. Damaged keys may also get stuck in the ignition if they're not fitted correctly.
If your key is damaged the best course of action is to call an auto repair or locksmith center for help. They can either replace the key for you or assist you in finding an improved, stronger key that is compatible with your vehicle's lock cylinder. It is very dangerous trying to remove a damaged or damaged key on your own, especially if this is your first time.
4. The key is stuck in the gear selector.
A lot of modern vehicles come with an option to lock the steering wheel when you try to move it after shutting off the vehicle. This feature is designed to stop theft, but it could also make it difficult to remove the keys. To solve the issue, put the vehicle in Park and shake the gear selector. This will usually unlock the steering lock, allowing you to remove your key.
You should also be aware that using force can cause damage to the ignition switch or key. It is better to contact an expert locksmith instead. They will have the tools and expertise needed to resolve the issue without causing any further damage.
In addition to shaking the gear selector, you can also try using a spare key or tap the end of the key using a mallet. This can help eliminate any obstructions preventing you from removing the key. If all the methods are unsuccessful, you should contact a car locksmith serving Montgomery for assistance. They'll have the tools and experience required to resolve the issue quickly and safely. They can also recommend other solutions to resolve your problem. Don't panic if your ignition key becomes stuck! Follow these easy steps to fix the issue.
5. The key is stuck inside the battery
The key may become stuck in the battery of the car and will not come out regardless of how many times you jiggle the key. If this happens it's recommended to speak with a professional who has experience dealing with such issues. They'll have the tools to safely remove your key without causing additional damage.
Another reason your key might be stuck in the ignition cylinder could be due to excessive wear and tear over time. The tiny tumbler pins in the cylinder that are aligned with your car key can be bent or collapsed which makes it difficult to wiggle the key and cause it to jam in the cylinder. Spraying WD-40, or a different kind of light lubricant on the key can help loosen the pins over a period of time.
If you can't remove the car key stuck in the ignition, do not use excessive force. This could cause damage to the key as well as the cylinder that controls the ignition. If you're unable to free your car key from the ignition, try shifting the shifter through different gears or using the key hammer with a tack. If you're still unable to get your key out ask an expert locksmith or mobile mechanic for assistance. They'll have the tools and know-how to fix the issue quickly. They'll also be able identify any other problems in your ignition.
6. The key is stuck inside the cylinder
The car key is subject to many abuses while driving. The key will get distorted a little each time you shut the car's door. Keep it in your pocket along with loose change, or place it on the floor. This wear makes it harder to insert or remove the key. This could also cause internal tumblers to stick to the key surfaces, causing it to wiggle or get stuck.
If this is your problem, use a torch to check the cylinder for metal debris that may cause it to not turn smoothly. This can be made much simpler by using a degreaser to clean the cylinder. Then spray the lock the cylinder with a dry graphite lubricant such as WD-40. This will allow the pins and springs move freely, so that the key can slide in and out with ease.
If none of these methods work, try jiggling the steering wheel while turning the key a few times. If the issue persists then contact a mechanic near you to get advice or examine the cylinder that controls the ignition. car keys repair could be time to replace it, if this is the scenario. It is recommended to do this as soon as possible or else you could end up stranded without a way to start your car.